تحقیقات نوین در برق، جلد ۹، شماره ۲، صفحات ۱۹-۲۷

عنوان فارسی طرح حذف بار ولتاژی در حضور منابع تولید پراکنده
چکیده فارسی مقاله : امروزه از منابع تولید پراکنده به‌طور گسترده‌ای استفاده می‌شود. این منابع چالش‌های جدیدی در مسائل مختلف سیستم قدرت به وجود می‌آورد. یکی از این چالش‌ها تأثیر این منابع بر مسئله حذف بار بهینه است. حذف بار در شبکه بعد از وقوع رخدادی همچون خروج خط از شبکه رخ می‌دهد. خروج یک خط از شبکه می‌تواند سبب افزایش توان عبوری از خطوط دیگر شود و موجب عملکرد سیستم‌های حفاظتی شده و درنتیجه فروپاشی شبکه را به همراه داشته باشد. در این مقاله یک روش جامع حذف بار ولتاژی7 جهت جلوگیری از فروپاشی شبکه و بازگرداندن شبکه به حالت بهره‌برداری عادی در حضور منابع تولید پراکنده پیشنهاد می‌شود. در این روش ابتدا بحرانی‌ترین خط که با خروج آن پایداری شبکه حداقل می‌شود، مشخص می‌شود. سپس با خروج خط منتخب توسط اپراتور با بهره‌گیری از ویژگی الگوریتم هارمونی حداقل میزان حذف بار و مکان DG به‌گونه‌ای مشخص می‌شود که حد بارپذیری شبکه حداکثر شود و شبکه دچار فروپاشی نشود. عملکرد طرح پیشنهادی بر روی دو شبکه استاندارد 14 و 30 باسه IEEE در دو سناریو بدون حضور منابع تولید پراکنده و حضور آن موردمطالعه قرار می‌گیرد.
کلیدواژه‌های فارسی مقاله الگوریتم جستجوی هارمونی، پایداری ولتاژ، حذف بار، منابع تولید پراکنده.

عنوان انگلیسی Under Voltage Load Shedding Scheme in the Presence of DGs
چکیده انگلیسی مقاله Nowadays, distributed generation (DG) is widely used in power systems. However, the use of DGs has caused new challenges in different aspects of power system operation, one of which is the effect of DGs on the optimal load shedding. Load shedding is a remedial action triggered after disturbances such line tripping. In fact, due to the line outage, the power flowing through other lines will increase which may cause protection systems to operate to trip the overloaded lines and in severe cases result in the system collapse. In this paper, a general load shedding method is proposed to prohibit the system from moving toward collapsing and helping the system to restore in the presence of DGs. In the proposed method, firstly the most critical line whose outage leads to the minimum values of stability indices is determined. Then, after putting this line out of service, harmony search algorithm is used to find the minimum amount of load shedding as well as the optimal location of DGs so that the loadability of the system is maximized preventing the system to collapse. The efficacy of the proposed methodology is demonstrated through applying it on IEEE 14 and 30-bus systems using various scenarios.
کلیدواژه‌های انگلیسی مقاله Harmony search algorithm, voltage stability, load shedding, distributed generation.

نویسندگان مقاله محمدحسن همت پور | Mohammad Hasan Hemmatpour
Department of Electrical Engineering, Jahrom University, Jahrom, Iran


محمدحسین رضائیان کوچی | Mohammad Hossein rezaeian Koochi
Department of Electrical Engineering, Shahid Bahonar University of Kerman, Kerman, Iran


ابوالفضل شعبانی اصل | Abolfazl Shabani-Asl
Department of Electrical and Computer Engineering, Jahrom Branch, Islamic Azad University, Jahrom, Iran
شرکت توزیع فارس استان شیراز


نشانی اینترنتی http://jeps.iaud.ac.ir/browse.php?a_code=A-10-176-2&slc_lang=fa&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده تخصصی
نوع مقاله منتشر شده کاربردی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات