|
|
International Journal of Engineering، جلد ۲۷، شماره ۶، صفحات ۸۲۹-۸۳۸
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Material Flow in Rotary Drums |
|
| چکیده انگلیسی مقاله |
The experimental investigation of material flow in rotary drums is studied. An equipment in the size of pilot-scale was used to collect experimental data for investigation of validity of the conventional steady-state model of material flow in rotary drums. Also, the transient data of the time required for material movement in the empty drum up to any specified cross section are also reported. The novelty of the work is that fine particles, in place of granular materials, were used in all of the experiments. The investigations reveals of the weak validity of the model for describing the bed depth of material at feeding zone as well as discharge zone. But, it is acceptable at mid zone. |
|
| کلیدواژه‌های انگلیسی مقاله |
Rotary Drum, Material Flow, Steady, State Model, Model Error |
|
| نویسندگان مقاله |
Mohammad Reza Yousefi |
, Iran Univ. Sci. Tech.
Mansour Shirvani |
Chem. Eng., Iran Univ. Sci. Tech.
|
|
| نشانی اینترنتی |
http://www.ije.ir/article_72316_777194624f4f1c95fac4b06f271acf1b.pdf |
| فایل مقاله |
اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062703.pdf |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|