International Journal of Engineering، جلد ۲۹، شماره ۱۲، صفحات ۱۷۴۱-۱۷۴۶

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Stress Intensity Factor Determination in Functionally Graded Materials, Considering Continuously Varying of Material Properties
چکیده انگلیسی مقاله In this paper, the plates made of functionally graded material (FGM) with and without a crack are numerically simulated, employing the finite element method (FEM). The material property variations are defined to be fully continuous; therefore, the elements can be as small as required. For this purpose, variations of the material properties are applied in both the integration points and in the nodes by implementing a subroutine in the ABAQUS software and hence, the stress field in the singular points such as crack tip is accurately achieved. First, the stresses in the plate without a crack are numerically determined and the accuracy of FGM behavior is validated. Then, the J-integral is investigated and the stress intensity factor (SIF) of the plate with a crack is calculated, using the strain energy release rate (SERR) and the J -integral. In the following, dependency of the J-integral on the path is studied and the results are compared with the contour independent J-integral. Finally, it is shown that if the selected path limits toward zero, the results of the J-integral, the SERR, and the contour independent J-integral are all the same. This is due to considering the continuously varying of material properties and the effect of fining the mesh at the crack tip.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله Hamid Khademhosseini Beheshti |
Mechanical Engineering, University of Isfahan

farhad haji aboutalebi |
Engineering, university of Esfahan

Mehdi Najimi |
Mechanical Engineering, University of Isfahan


نشانی اینترنتی http://www.ije.ir/article_72848_2555faa45ac5ba6d6d6ee1e0e6556d76.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062193.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات