International Journal of Engineering، جلد ۳۰، شماره ۱۱، صفحات ۱۸۰۷-۱۸۱۳

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation
چکیده انگلیسی مقاله This study is designed to consider the two important yet often neglected factors, which are factory recommendation and bit features, in optimum bit selection. Image processing techniques have been used to consider the bit features. A mathematical equation, which is derived from a neural network model, is used for drill bit selection to obtain the bit’s maximum penetration rate that corresponds to the optimum parameters for drilling. At the end, the bit with the maximum penetration rate is chosen. The results of this study showed that bit pattern can be inserted in the calculation through a proper bit image processing technique. This is to ensure that each unique bit can be discriminated from other bits. The values of mean square error and coefficient of determination (R2) were respectively found as 0.0037 and 0.9473, for the rate of penetration model. The image processing techniques were used to extract the bit features. The artificial neural network black box was converted to white box in order to extract a mathematical equation and visibility of the model.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله Moacyr Bartholomeu Laruccia |
Petroleum Engineeing, Universiti Teknologi PETROPNAS

Xianhua Liu |
Petroleum Engineeing, Universiti Teknologi PETROPNAS

Amin Atashnezhad |
Chemical Engineering, Oklahoma State University

Samira Ghaheri |
Petroleum Geoscience, Universiti Teknologi PETROPNAS

MohammadSadegh Momeni |
Petroleum Engineeing, Universiti Teknologi PETROPNAS

نشانی اینترنتی
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061988.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات