International Journal of Engineering، جلد ۳۱، شماره ۱، صفحات ۱۲۸-۱۳۵

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design
چکیده انگلیسی مقاله In the present paper, a supersonic wind-tunnel is designed to maintain a flow with Mach number of 3 in a 30cm×30cm test section. An in-house CFD code is developed using the Roe scheme to simulate flow-field and detect location of normal shock in the supersonic wind-tunnel. In the Roe scheme, flow conditions at inner and outer sides of cell faces are determined using an upwind biased algorithm. The in-house CFD code has been parallelized using OpenMp to reduce the computational time. Also, an appropriate equation is derived to predict the optimum number of cores for running the program with different grid sizes. In the design process of the wind-tunnel, firstly geometry of the nozzle is specified by the method of characteristics. The flow in the nozzle and test section is simulated in the next step. Then, design parameters of the diffuser (convergence and divergence angles, area of the throat, and ratio of the exit area to the throat area) are determined by a trial and error method. Finally, an appropriate geometry is selected for the diffuser which satisfies all necessary criteria.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله Hamed Bagheri Esfe. |
Mechnical, University of Shahreza

Mojtaba Dehghan Manshadi |
Aerospace and Mechanical Engineering, Malek-Ashtar University Of Technology

نشانی اینترنتی
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061944.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات