International Journal of Engineering، جلد ۳۱، شماره ۱، صفحات ۱۰۴-۱۰۹

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading
چکیده انگلیسی مقاله Use of composites for a range of structural application in aircrafts, space-crafts, automobiles, etc., has widely spread in the last few years. Other than weight reduction, cut-outs provide pathways to link different aircraft parts. In this paper, an experimental investigation was conducted to study the effect of a cut-out on the tensile strength of the fiber glass/ epoxy composite plate. Geometry of the cut-out is one of the important factors which can critically alter the mechanical properties. So, cut-outs with various geometrical shapes such as square and circle were introduced in the fiber glass/ epoxy composite plate and tensile tests were performed under ambient conditions. It was determined from the tests that specimens with circular cut-out have higher tensile strength as compared to specimens with square cut-out.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله Kanu Jhanji |
School of Aeronautical Sciences, Hindustan Institute of Technology and Science

Amit Kumar R |
School of Aeronautical Sciences, Hindustan Institute of Technology and Science

Likhith PVN |



نشانی اینترنتی http://www.ije.ir/article_73098_4013ea020d41f324b0dd4ac3bf78f190.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061941.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات