|
|
International Journal of Engineering، جلد ۳۱، شماره ۷، صفحات ۱۱۴۶-۱۱۵۱
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) |
|
| چکیده انگلیسی مقاله |
The feasibility and parameters optimization of AA5183 aluminum cladding on AISI 1018 steel by electro spark microwelding (ESM) and the corrosion resistance of the clad plate were investigated. The optimum conditions were found as 15 A, 10%, 800 Hz and 2500 rpm for P, D, F and R factors, respectively. Confirmation test under optimum conditions showed that the model can be effectively used to predict the corrosion resistance of the aluminum clad steel. It appeared that higher cooling rates in the ESM process reduced the formation of detrimental precipitates owing to high intrinsic mutual affinity of Al and Fe. Excessive increase in the cooling rates was found to have a correlation to crack formation and reduced the corrosion resistance. Corrosion resistance of AA5183 aluminum clad AISI 1018 steel samples fabricated by ESM was a result of a compromise between the cooling rate and crack formation considerations in the clad. |
|
| کلیدواژه‌های انگلیسی مقاله |
|
|
| نویسندگان مقاله |
C. C. Sorrell |
School of Materials Science and Engineering, University of New South Wales (UNSW), Australia
A. Kianvash |
Department of Materials Engineering, University of Tabriz
Hossein Aghajani |
Materials Engineering, University of Tabriz
Ebad Rastkerdar |
Department of Materials Engineering, University of Tabriz
|
|
| نشانی اینترنتی |
http://www.ije.ir/article_73228_6730f8d2e631caf0f509e7b901d747f1.pdf |
| فایل مقاله |
اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061824.pdf |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|