این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 21 آذر 1404
پژوهشهای آسیب شناسی زیستی
، جلد ۱۵، شماره ۲، صفحات ۴۷-۶۰
عنوان فارسی
ساخت و بررسی خواص زیستی داربستهای کامپوزیتی ابریشم بازیابی شده / شیشه زیستفعال برای مهندسی بافت استخوان
چکیده فارسی مقاله
هدف: یکی از مسائل اصلی مهندسی بافت استخوان طراحی و ساخت داربستهای سهبعدی زیستفعال و قابل جذبی است که بتواند یکپارچگی ساختاری خود را در طول زمان ترمیم حفظ کند؛ یکی از رویکردهای دستیابی به این هدف ساخت داربستهای کامپوزیتی است. مواد و روشها: در این پژوهش ساخت و مشخصهیابی داربست کامپوزیتی متشکل از ابریشم بازیابی شده و شیشه زیستفعال بیان شده است. ابریشم بازیابی شده از پیلههای کرم ابریشم و شیشه کلسیم سیلیکوفسفاتی به روش سل- ژل تهیه شد. برای ایجاد یک کامپوزیت یکنواخت، ذرات شیشه زیستفعال آسیاب و توسط تری آمینو پروپیل تریتوکسی سیلان پوشش داده شد. داربستهای کامپوزیتی ابریشم/ شیشه زیستفعال به روش خشکاندن انجمادی و در نسبتهای متفاوتی تهیه شد. نتایج: شیشه زیستفعال و پروتئین ابریشم (فیبروئین) با استفاده از آزمون های FTIR و XRD بررسی شد. در طیف FTIR پروتئین ابریشم نقاط اوج به طور واضح در طول موجهای cm-1 1655 و cm-1 1530 ظاهر شد که حضور فیبروئین را تأیید میکرد. انجام آزمون XPS روی پودر شیشه پوشش داده، حضور گروههای آمینی روی سطح ذرات شیشه را نشان داد. سپس ساختار داربستهای سه بعدی توسط میکروسکوپ الکترونی روبشی بررسی شد. تصاویر بهدست آمده ساختار یکنواخت و متخلخل داربستها را به خوبی مشخص کرد. سلولهای بنیادی مزانشیمی انسانی روی داربستها کاشته شد و طی 21 روز آزمونهای زیستی، رشد و تکثیر و تمایز روی آنها انجام شد. نتیجهگیری: با توجه به ساختار یکپارچه، زیستسازگاری و تمایز استخوانی سلولها پس از سه هفته، به نظر میرسد داربستهای کامپوزیتی ابریشم/ شیشه زیستفعال گزینه قابل طرحی در زمینه داربستهای مهندسی بافت استخوان باشد.
کلیدواژههای فارسی مقاله
شیشه زیستفعال، سلولهای بنیادی، ابریشم،
عنوان انگلیسی
Fabrication and Characterization of Regenerated Silk/bioglass Composites for Bone Tissue Engineering
چکیده انگلیسی مقاله
Objective: One of the major issues in bone tissue engineering is the design and fabrication of bioactive, bioresorbable porous 3D scaffolds capable of maintaining their structure and integrity over a predictable period of time. One such approach is the fabrication of composite scaffolds. Methods: In this study we present fabrication and characterization of novel silk/bioglass-composite scaffolds. Regenerated fibroin was constructed from mulberry silk cocoons and calcium silicophosphate bioactive glass was made by sol-gel processing. For fabrication of a homogenous composite, grained bioglass particles were modified with 3-aminopropyltriethoxysilane coating. Fibroin/bioglass composite scaffolds were fabricated by the freeze-dry technique at different concentrations. Results: Silk protein extract was evaluated by FTIR and XRD methods. FTIR spectrum showed sharp amide peaks at 1655 cm-1 and 1530 cm-1 wave lengths, which confirmed the existence of fibroin. XPS analysis demonstrated that the amino groups were established on the surface of the glass powder. The fabricated 3D scaffolds were morphologically analyzed by scanning electron microscopy, which showed uniformly dispersed bioglass particles in all structures. Scaffolds were seeded with human mesenchymal stem cells for 21 days. Conclusion: Considering the cytocompatibility of the scaffolds and osteogenic differentiation during three weeks, it could be concluded that the appropriate combination of structural and biological properties make the silk/bioglass composite scaffold a probable choice for potential use in bone tissue engineering.
کلیدواژههای انگلیسی مقاله
Bioactive Glass, Stem cells, Silk
نویسندگان مقاله
صهبا مبینی | sahba mobini
assistant professor, reproductive biotechnology research center, avicenna research institute, academic center for education, culture and research acecr , tehran, iran
مهران صولتی هشجین | mehran solati hashjin
associated professor, department of biomaterial, faculty of medical engineering, amirkabir university of technology, tehran, iran
سازمان اصلی تایید شده
: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)
سعید حصارکی | saeed hesaraki
assistant professor, material and energy research center, karaj, iran
سازمان اصلی تایید شده
: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)
میشاییل گلینسکی | michael gelinsky
professor, centre for translational bone, joint and soft tissue research, university hospital carl gustav carus and medical faculty of technische universität dresden, germany
سازمان اصلی تایید شده
: پژوهشگاه مواد و انرژی
نشانی اینترنتی
http://mjms.modares.ac.ir/article_6218_dfa70ccf57a44f57014c1fd13f9da175.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
1
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات