مجله علمی-پژوهشی علوم و فناوری جوشکاری ایران، جلد ۳، شماره ۲، صفحات ۴۹-۵۷

عنوان فارسی جوشکاری مقاومتی نقطهای آلیاژ آلومینیوم ۲۰۲۴ نانوساختار و ارزیابی خواص مکانیکی اتصال
چکیده فارسی مقاله در این تحقیق به منظور بهبود خواصمکانیکی آلیاژ آلومینیوم 2024، ابتدا آلومینیوم نانوساختار به روش نورد تبریدی تولید و سپس به روش جوشکاری مقاومتی نقطه­ای جوشکاری شد. برای این منظور نمونه­های آلومینیومی پس از انجام عملیات آنیل محلولی در دمای ºC495 به مدت 55 دقیقه، نمونه­ها تا کاهش ضخامت 85 درصد تحت فرآیند نورد تبریدی قرار گرفتند. سپس به منظور حصول همزمان استحکام و انعطاف­پذیری ورق­های تولید شده تحت عملیات پیر­سازی قرار گرفتند. در این راستا آلیاژ فوق با پارامتر­های مختلف جوش، شامل شدت جریان 60 الی KA105، نیروی الکترود KN 3، و مدت زمان جوشکاری 1/0 ثانیه جوشکاری شد. بیشترین میزان نیروی برش کشش دکمه جوش در شرایط جوشکاری با جریانKA 95 بدست آمد.  
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Resistance Spot Welding of nanostructured Al 2024 alloy and Evaluation of weldment mechanical properties
چکیده انگلیسی مقاله In this research in order to improve the mechanical properties of Aluminium alloy 2024, nanostructure Aluminum sheets were first produced by Cryorolling process and then was welded by resistance spot welding method. For this purpose, the samples solution treated at 495˚C for 55 minute and subsequently cryorolled up to 85% reduction in thickness. For obtaining simultaneous strength and ductility, the cryorolled sheets were then subjected to aged. In this regard the produced samples were then resistance spot welded with different welding parameters, including welding current 60 to 105 KA, electrode force of 3 KN, and welding time of 0.1 s. The highest tensile shear peak load was obtained through welding with 95 KA current.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله پیام قیصری |
isfahan university of technology, faculty of material engineering

سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

فتح اله کریم زاده |
isfahan university of technology, faculty of material engineering

سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

احمد رضاییان |
isfahan university of technology, faculty of material engineering

سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

امین شهسواری |
isfahan university of technology, faculty of material engineering

سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)


نشانی اینترنتی http://jwsti.iut.ac.ir/browse.php?a_code=A-10-95-2&slc_lang=fa&sid=fa
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده تخصصی
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات