این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Science and Engineering، جلد ۱۵، شماره ۲، صفحات ۰-۰

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
چکیده انگلیسی مقاله Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (< 0.5 mA/cm2), the coatings were relatively pure tin, but Zn content increased with enhancing the current density. At higher currents a relatively pure Zn film was obtained. Temperature and pH also affected chemical composition of the alloy films. Zn content of the coatings was decreased by increasing the temperature, while its variation with pH had ascending-descending trend. Morphological investigation of the coatings revealed that increasing Zn content of deposits led to porous, rough and fine grained films.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله s اکبرزاده | s. akbarzadeh
school metallurgy and materials engineering, college of engineering, university of tehran

سازمان اصلی تایید شده: دانشگاه تهران (Tehran university)

سیدرضا اله کرم | s r allahkaram
school metallurgy and materials engineering, college of engineering, university of tehran

سازمان اصلی تایید شده: دانشگاه تهران (Tehran university)

s مهدوی | s. mahdavi
research center for advanced materials, faculty of materials engineering, sahand university of technology

سازمان اصلی تایید شده: دانشگاه صنعتی سهند (Sahand university of technology)


نشانی اینترنتی http://ijmse.iust.ac.ir/browse.php?a_code=A-10-167-9&slc_lang=en&sid=en
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده گروه سطح پوشش و خوردگی
نوع مقاله منتشر شده Research paper
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات