این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
مجله دانشکده دندانپزشکی مشهد، جلد ۴۱، شماره ۴، صفحات ۳۱۷-۳۲۴

عنوان فارسی مقایسه‌ استحکام پیوند ریزبرشی کامپوزیت رزین سیلوران با کامپوزیت متاکریلاتی معمول به عاج دندان‌های شیری
چکیده فارسی مقاله مقدمه: یکی از معیارهای مهم در انتخاب ماده ترمیمی، استحکام پیوند بین ماده‌ی ترمیمی و دندان است که در انجام ترمیم‌ منطبق با ساختار دندان و کاهش ریزنشت دارای اهمیت است. با توجه به اقبال جدید به کامپوزیت‌ رزین‌های با انقباض کم،هدف مطالعه‌ی حاضر، مقایسه‌ی استحکام پیوند ریزبرشی کامپوزیت رزین سیلوران (P90) با کامپوزیت متاکریلاتی معمول (Z250)به عاج دندان‌های شیری بود. مواد و روشها : در این مطالعه‌ی آزمایشگاهی،24 دندان کانین شیری سالم انتخاب شدند. از هر دندان دو دیسک‌ عاجی به ضخامت دو میلی‌متر تهیه گردید. نمونه‌ها به چهار گروه 12‌تایی تقسیم شدند. در هر گروه، سیلندر کامپوزیتی به قطر7/0 میلی‌متر به شرح زیر به سطح عاج پیوند گردید. گروه اول: سیستم باند P90 + کامپوزیتP90،  گروه دوم: اچینگ + سیستم باند P90 + کامپوزیتP90 ، گروه سوم: + Single bond+کامپوزیتZ250 ، گروه چهارم: اچینگ +Single bond+ کامپوزیت Z250 .  سپس نمونه‌ها تحت نیروی برشی قرار گرفتند تا در نهایت دچار شکست شوند. داده‌ها با آزمون های آماری توسط  Tamhane's T2 آنالیز شدند و05/0p< معنی‌دار تلقی گردید. یافته‌ها: میانگین استحکام پیوند ریزبرشی در چهار گروه مورد مطالعه، با هم تفاوت معنی‌دار داشتند (05/0p<). به این ترتیب که بیشترین میزان استحکام پیوند مربوط به گروه دوم وکمترین آن مربوط به گروه سوم بود. نتیجه‌گیری: کامپوزیت  P90نسبت به کامپوزیت Z250، استحکام پیوند ریز‌برشی بیشتری به عاج دندان‌های شیری داشته و کاربرد اچ قبل از کاربرد پرایمر در سیستم  باندینگ سیلوران، قدرت پیوند این کامپوزیت رزین را به عاج دندان‌های شیری افزایش داد.  
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Comparison of Micro-Shear Bond Strength between Silorane-Based Composite and Conventional Methacrylate-Based Composite to the Dentin of Primary Teeth
چکیده انگلیسی مقاله Introduction: Bond strength between the restorative material and tooth structure is one of the major factors in the selection of restorative materials, which plays a key role in durable restoration and reducing microleakage. Considering the recent attention of researchers to low-shrinkage composites, the present study aimed to compare the micro-shear bond strength of silorane-based composite (P90) with the conventional methacrylate-based composite (Z250) to the dentin of primary teeth. Materials and Methods: In this experimental study, 24 intact primary canines were selected. Two disks (thickness: 2 mm) were prepared from each tooth, and the samples were randomly divided into four groups (n=12). Composite resin cylinders (r=0.7) were adapted on each dentin surface, as follows: g1: (silorane bond system + P90), g2: (etch + silorane bond system + P90), g3: (single bond + Z250), g4: (etch + single bond + Z250). Afterwards, the samples were subjected to a micro-shear bond strength test until failure. Data analysis was performed using Tamhane's T2 (P< 0.05). Results: Statistically significant differences were observed between the four groups of g1, g2, g3, and g4. The highest bond strength was reported in the second group (etch + silorane bond + composite P90), while the third group (single bond + Z250) had the lowest micro-shear bond strength compared to the other groups. Conclusion: According to the results, silorane-based composite (P90) has higher micro-shear bond strength to the primary dentin compared to the methacrylate-based composite (Z250). Moreover, etching the surfaces could increase the bonding efficiency of P90 to the primary dentin.  
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله مریم شریفی | maryam sharifi
department of paediatric dentistry, school of dentistry, rafsanjan university of medical sciences, rafsanjan, iran
استادیار دندانپزشکی کودکان، دانشکده دندانپزشکی، دانشگاه علوم پزشکی رفسنجان، رفسنجان، ایران
سازمان اصلی تایید شده: دانشگاه علوم پزشکی رفسنجان (Rafsanjan university of medical sciences)

سمیه خرمیان طوسی | somayeh khoramian tusi
department of paediatric dentistry, school of dentistry, alborz university of medical sciences, karaj, iran
استادیار دندانپزشکی کودکان، دانشکده دندانپزشکی، دانشگاه علوم پزشکی البرز، کرج، ایران
سازمان اصلی تایید شده: دانشگاه علوم پزشکی البرز (Alborz university of medical sciences)


نشانی اینترنتی http://jmds.mums.ac.ir/article_9890.html
فایل مقاله دریافت فایل مقاله
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده مقاله پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات