|
|
Journal of Dentistry, Shiraz University of Medical Sciences، جلد ۱۸، شماره ۴، صفحات ۲۸۹-۰
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
The Accuracy of Four Impression-making Techniques in Angulated Implants Based on Vertical Gap |
|
| چکیده انگلیسی مقاله |
Statement of the Problem: Precision of the impression taken from implant positions significantly determines accurate fit of implant-supported prostheses. An imprecise impression may produce prosthesis misfit. Purpose: This study aimed to evaluate the accuracy of four impression-making techniques for angulated implants by stereomicroscope through measuring the vertical marginal gaps between the cemented metal framework and the implant analog. Materials and Method: A definitive cast with two 15° mesially angulated implants served as the standard reference for making all the impressions and later for accuracy evaluation. Four groups of five samples were evaluated: (1) closed-tray snap-fit transfer, (2) open-tray nonsplinted impression coping, (3) metal splinted impression coping, and (4) fabricated acrylic resin transfer cap. A gold-palladium framework was fabricated over the angulated implant abutments, the fit of which was used as reference. The gaps between the metal framework and the implant analogs were measured in sample groups. Corresponding means for each technique and the definitive cast were compared by using ANOVA and post hoc tests. Results: The mean marginal gap was 38.16±0µm in definitive cast, 89±19.74µm in group 1, 78.66±20.63µm in group 2, 54.16±24.29µm in group 3, and 55.83± 18.30µm in group 4. ANOVA revealed significant differences between the definitive cast and groups 1 and 2, but not with groups 3 and 4 ( p < 0.05). Conclusion: Vertical gap measurements showed that metal splinted impression coping and fabricated acrylic resin transfer cap techniques produced quite more accurate impressions than closed-tray snap-fit transfer and open-tray nonsplinted impression coping techniques do. The fabricated acrylic resin transfer cap technique seems to be a reliable impression-making method. |
|
| کلیدواژه‌های انگلیسی مقاله |
|
|
| نویسندگان مقاله |
ابوالفضل صبوری | abolfazl saboury
dental sciences research center, dept. of prosthodontics, school of dentistry, guilan university of medical sciences, rasht, iran.
سازمان اصلی تایید شده: دانشگاه علوم پزشکی گیلان (Guilan university of medical sciences)
حمید نشاندار اصلی | hamid neshandar asli
dental sciences research center, dept. of radiology, school of dentistry, guilan university of medical sciences, rasht, iran.
سازمان اصلی تایید شده: دانشگاه علوم پزشکی گیلان (Guilan university of medical sciences)
زهرا دلیلی کاجان | zahra dalili kajan
|
|
| نشانی اینترنتی |
http://dentjods.sums.ac.ir/index.php/JDSUMS/article/view/1399 |
| فایل مقاله |
دریافت فایل مقاله |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
Original Articles |
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|