این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۴، شماره ۱، صفحات ۵۲-۶۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Prediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach
چکیده انگلیسی مقاله Vortex extrusion (VE) is a severe plastic deformation technique which is based on the synergies between high strain accumulation and high hydrostatic pressure. Such a high amount of pressure, places a mandate to seek the method for investigation of the load under processing conditions. For this, kinematically admissible velocity field and upper bound terms based on Bezier formulation are developed in order to investigate relative pressure in the VE process. Effects of reduction in area, relative length, twist angle, and friction factor in power dissipation terms are systematically analyzed. It is demonstrated that increasing the twist angle and area reducing and friction factor in the VE process increases the relative pressure, which the rates of these increase varies with twist angle. Moreover, the effect of the relative length is different in various frictional conditions. Results of conventional extrusion (CE) are in good agreement with those found by Avitzur for the effect of slug length and friction factor on the relative extrusion stress.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله m شهباز |
-department of materials science and engineering, school of engineering, urmia university, urmia, iran
سازمان اصلی تایید شده: دانشگاه ارومیه (Urmia university)

جاسم کیم | j g
department of materials science and engineering, postech, pohang 790-784, republic of korea

r ابراهیمی |
department of materials science and engineering, school of engineering, shiraz university, shiraz, iran
سازمان اصلی تایید شده: دانشگاه شیراز (Shiraz university)

هانیه السادات کیم | h s
department of materials science and engineering, postech, pohang 790-784, republic of korea

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_4060_5bd7ff1ef9abc19fe52fb057609f8630.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/453/article-453-472193.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات