این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Iron and Steel Society of Iran، جلد ۱۴، شماره ۱، صفحات ۳۷-۴۳
عنوان فارسی Effects of Ferrosilicon Addition and Formation of Insitu SiC Nano-whiskers on MgO-C Refractories
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effects of Ferrosilicon Addition and Formation of Insitu SiC Nano-whiskers on MgO-C Refractories
چکیده انگلیسی مقاله Nowadays, SiC is one of the refractory materials which is used widespread because of its unique properties like structural stability in high temperatures. SiC nano whiskers are important in reinforcement of different kinds of composites like ceramic base materials, thanks to their outstanding mechanical, thermal, and chemical properties like low expansion coefficient, high thermal resistant, high elastic coefficient, low density, and high resistant to oxidation. The most important problem of MgO-C refractories is carbon oxidation in high temperatures, resulting in the porosity and loss of strength. Using SiC as an antioxidant in such refractories also improves thebehavior of MgO-C refractories. In this study ferrosilicon has been used to prepare insitu nano SiC whiskers and the effects of insitu SiC nano-whiskers on mechanical, physical and corrosion properties of MgO-C refractories during heat treatment have been investigated. The strength was measured by Cold crushing strength (CCS) according to ASTM C133-97 and Brazilian test. Also, bulk density (BD) and apparent porosity (AP) were studied according to ASTM C-20-92. XRD and SEM have been used  to study phase composition and observing the structure, respectively.  The results showed that by the formation of these nano-whiskers at high temperatures the strength was increased and corrosion and physical properties have been improved.
کلیدواژه‌های انگلیسی مقاله MgO-C refractories, SiC nano-whiskers, Strength, Corrosion, Physical properties
نویسندگان مقاله m بختیاری |
department of materials engineering, isfahan university of technology, isfahan 84156-83111, iran
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

r عمادی |
department of materials engineering, isfahan university of technology iut , isfahan, 84156-83111, iran
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

a منشی |
department of materials engineering, isfahan university of technology, isfahan 84156-83111, iran
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

نشانی اینترنتی
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات