این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
مهندسی مکانیک مدرس، جلد ۲۵، شماره ۵، صفحات ۲۷۱-۲۷۸
عنوان فارسی Experimental Modeling and Process Optimization of Laser Transmission Welding with Fiber Optic Laser for Polymethyl Methacrylate in Zigzag Path
چکیده فارسی مقاله Polymethyl methacrylate (PMMA) is extensively used in automotive, aerospace, and consumer products industries due to its favorable mechanical characteristics. Laser Transmission Welding (LTW) has recently gained attention as an advanced joining method for creating strong, narrow, and lightweight welds in thermoplastics like PMMA. This study examines the effects of three key process parameters—laser power, welding speed, and scan line spacing—on the LTW performance when bonding two transparent PMMA sheets using a fiber laser along a zigzag path. The main objective is determining the feasibility of practical welding at low laser power while achieving high joint strength. Experimental design and optimization were conducted using Analysis of Variance (ANOVA) and Response Surface Methodology (RSM). ANOVA confirmed that all three parameters significantly influenced lap-shear force. RSM results showed that higher laser power, lower welding speed, and reduced scan line spacing increased heat input and improved weld strength, with a maximum lap-shear force of 1256 N. In contrast, lower laser power, faster welding, and wider spacing reduced heat input and resulted in a minimum strength of 245 N. Desirability-based optimization identified optimal settings of 30 W laser power, 400 mm/s welding speed, and 0.015 mm scan line spacing, predicting a lap-shear force of 1249.2 N with 99.3% confidence. The results demonstrate that zigzag LTW of PMMA is feasible at low power levels, attributed to uniform heat distribution and consistent melting achieved by the zigzag path.
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental Modeling and Process Optimization of Laser Transmission Welding with Fiber Optic Laser for Polymethyl Methacrylate in Zigzag Path
چکیده انگلیسی مقاله Polymethyl methacrylate (PMMA) is extensively used in automotive, aerospace, and consumer products industries due to its favorable mechanical characteristics. Laser Transmission Welding (LTW) has recently gained attention as an advanced joining method for creating strong, narrow, and lightweight welds in thermoplastics like PMMA. This study examines the effects of three key process parameters—laser power, welding speed, and scan line spacing—on the LTW performance when bonding two transparent PMMA sheets using a fiber laser along a zigzag path. The main objective is determining the feasibility of practical welding at low laser power while achieving high joint strength. Experimental design and optimization were conducted using Analysis of Variance (ANOVA) and Response Surface Methodology (RSM). ANOVA confirmed that all three parameters significantly influenced lap-shear force. RSM results showed that higher laser power, lower welding speed, and reduced scan line spacing increased heat input and improved weld strength, with a maximum lap-shear force of 1256 N. In contrast, lower laser power, faster welding, and wider spacing reduced heat input and resulted in a minimum strength of 245 N. Desirability-based optimization identified optimal settings of 30 W laser power, 400 mm/s welding speed, and 0.015 mm scan line spacing, predicting a lap-shear force of 1249.2 N with 99.3% confidence. The results demonstrate that zigzag LTW of PMMA is feasible at low power levels, attributed to uniform heat distribution and consistent melting achieved by the zigzag path.
کلیدواژه‌های انگلیسی مقاله Laser transmission welding,Polymethyl methacrylate,Transparent polymer welding parameters,Zigzag Path,Response Surface Methodology (RSM),Optimization
نویسندگان مقاله میلاد رحمانی نیا | Milad Rahmaninia
Department of mechanical Engineering, K.N. Toosi University of Technology
دانشگاه خواجه نصیرالدین طوسی

مجید قریشی | Majid Ghoreishi
Department of mechanical Engineering, K.N. Toosi University of Technology
دانشگاه صنعتی خواجه نصیرالدین طوسی

نشانی اینترنتی http://mme.modares.ac.ir/browse.php?a_code=A-10-87786-1&slc_lang=fa&sid=15
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات