|
|
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۹، صفحات ۲۳۶۱-۲۳۷۶
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Investigation of a Vacuum Ejector Used in a Dynamic Function Vehicle Tire Air Control Valve |
|
| چکیده انگلیسی مقاله |
A critical component of a central tyre inflation system (CTIS) is the tyre valve. When positive pressure air is directed to the valve, it allows air to enter the tyre, increasing the tyre’s internal pressure. Conversely, when vacuum pressure is applied, the tyre pressure decreases. Consequently, the tyre valve must be capable of generating negative pressure when necessary to function effectively. While the CTIS includes a compressed air reservoir and a pressure pump for reservoir filling, it lacks a dedicated vacuum pump to create negative pressure. Instead, negative pressure is generated by an ejector that utilises the Venturi effect to accelerate the air through an orifice, creating low pressure using pressurised air from the reservoir. The primary advantage of this design is its ability to generate negative pressure without an additional component, such as a vacuum pump, relying solely on the existing high-pressure air. This study presents both experimental and numerical investigations of a vacuum ejector designed to generate negative pressure. The experimental results align closely with the numerical simulations. Furthermore, the study explores the impact of varying the throat diameter of the vacuum ejector to enhance fluid velocity, with the optimal performance observed at −98 kPa for a 1 mm throat diameter. For throat diameters of <1 mm, the flow becomes unstable, and at 0.2 mm, the flow is completely obstructed, rendering the system inoperative. |
|
| کلیدواژه‌های انگلیسی مقاله |
Computational fluid dynamics,Central tyre inflation system,Pneumatic,Vacuum,valve |
|
| نویسندگان مقاله |
Y. S. Korkmaz |
Altan Hydraulic Engineering Industry and Trade Corporation, Istanbul, 34956, Turkey
A. Kibar |
Department of Mechanical and Material Technologies, Kocaeli University, Uzunciftlik Nuh Cimento Campus, 41180, Kocaeli, Turkey
K. Suleyman Yigit |
Department of Mechanical Engineering, Faculty of Engineering, Kocaeli University, Umuttepe Campus, 41380, Kocaeli, Turkey
E. Erturk |
Department of Mechanical Engineering, Medeniyet University, North Campus, 34700, Istanbul, Turkey
Z. Doğruyol |
Altan Hydraulic Engineering Industry and Trade Corporation, Istanbul, 34956, Turkey
|
|
| نشانی اینترنتی |
https://www.jafmonline.net/article_2715_bc62eb37d472823cd87367c5de78de8c.pdf |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|