این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۸، شماره ۱۲، صفحات ۲۸۴۲-۲۸۵۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Optimization, Characterization, and Mechanical Properties of Printed Eco UV Resin Using 3D Printer on Moving Ultraviolet Light Curing
چکیده انگلیسی مقاله Presently, Three-dimensional printer technology, an exceptionally light curing-based process, has developed intensively. Depending on the light source, many commercial three-dimensional printers are available at low to high prices. Blue light, ultraviolet, and laser are the most common light sources suitable for light projection-based technology. However, improving the interaction between the light source and the material processed is still challenging. The study aimed to find the optimum parameters of distance the moving ultraviolet light to the material and print speed based on curing depth. In this study, a commercial ultraviolet light source was carried out using Cure Beam Ultraviolet Light with a wavelength of 405 nm, which was exposed in a dark environment and at room temperature. The material was Eco UV Resin Anycubic, one of the photoliquid types. MiView camera was used to obtain the depth of the curing during the light exposure using a commercial three-dimensional printer. The response surface method optimized the printing parameter with 13 sets of specimens. The specimens were printed in the form of a line shape. Characterization and mechanical properties were investigated using a scanning electron microscope and Shore D Durometer. The results show that the optimum setup printing parameters were 10 mm and 1 mm/s for distance and print speed, respectively. Furthermore, the optimum parameter setting of curing depth was 8.029 mm. The surface shows the smooth (curing area) and wavy area. The hardness numbers of the optimum parameter were 61.3 HD  (top) and 58.5 HD (bottom). 
کلیدواژه‌های انگلیسی مقاله Three-dimensional Printer,Blue light,UV light,Curing depth
نویسندگان مقاله H. V. Hoten |
Mechanical and Industrial Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia

A. E. Tontowi |
Mechanical and Industrial Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia

H. Herianto |
Mechanical and Industrial Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia

N. Nurbaiti |
Mechanical and Industrial Engineering Department, Universitas Gadjah Mada, Yogyakarta, Indonesia

نشانی اینترنتی https://www.ije.ir/article_217083_cea29a26adb012d6b4154ff0bcbd93bb.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات