این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Polyolefins Journal، جلد ۱۱، شماره ۴، صفحات ۲۶۵-۲۷۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites
چکیده انگلیسی مقاله Composites of polypropylene (PP) and calcium lactate (CL) with a constant weight percentage of 60% and 40%, respectively, were compounded with 3, 5 and 7 phr of epoxidized soybean oil (ESO) plasticizer using an internal mixer. The testing samples were prepared using an injection molding technique. The effects of the mold temperature and annealing treatment on the morphological and mechanical properties of PP-based composites using polarized optical microscopy (POM), differential scanning calorimetry (DSC), universal testing machines (UTM), and impact tester were performed. The results showed a remarkable increase in the elongation-at-break and impact strength, but a noticeable decrease in tensile strength and stiffness with increasing ESO contents. The experimental results also indicated that the higher mold temperature significantly improved the tensile strength and stiffness of samples due to an increase in spherulite size for neat PP, PP/CL composite and PP/CL composite with 3 phr of ESO. Additionally, annealing treatment enhanced the tensile and impact strengths of both neat PP and PP/CL composite, which was attributed to the increase in the crystal perfection and degree of crystallinity. These findings suggested that mechanical improvements using high mold temperature and annealing treatment were confined to the incorporation of an ESO plasticizer. The resulting performance of the plasticized PP composites after thermal treatment was described by two possibilities: the loss in the adhesion between the components and the migration of plasticizer.
کلیدواژه‌های انگلیسی مقاله Polyolefins, structure-properties relations, crystallization, injection molding, polymer-matrix composite
نویسندگان مقاله Buncha Suksut |
Faculty of Engineering and Technology, King Mongkuk’s University of Technology North Bangkok, Rayong, Thailand

Pathamanat Poonkasem |
Faculty of Engineering and Technology, King Mongkuk’s University of Technology North Bangkok, Rayong, Thailand

Sirirat Prasittinawa |
Faculty of Engineering and Technology, King Mongkuk’s University of Technology North Bangkok, Rayong, Thailand

Patcharapon Somdee |
Department of Materials and Medical Technology Engineering, Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand

نشانی اینترنتی http://poj.ippi.ac.ir/article_2074_a8eb2d03dcec12348fd5046f6c8b949d.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات