این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Iranian Journal of Chemistry and Chemical Engineering
، جلد ۴۳، شماره ۱، صفحات ۲۴۳-۲۵۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Preparation and Thermophysical Properties of Ternary Eutectic Composite PCM for Thermal Energy Storage Applications
چکیده انگلیسی مقاله
In this study, graphene oxide (GO) particles were integrated into a ternary eutectic mixture of capric-lauric-myristic acid (CA-LA-MA) to form a composite material (CA-LA-MA/GO). The GO particles were synthesized using the modified Hummers method, and their size, shape, and morphology were confirmed through XRD and SEM analyses. The ternary mixture was prepared based on theoretically calculated mass ratios and validated using DSC. FT-IR analysis was employed
to verify the physical interactions among the precursor components. Notably, the CA-LA-MA/GO composite exhibited thermal decomposition only above 125°C. The phase change temperature demonstrated consistent behavior after the addition of GO, even after undergoing 1000 thermal cycles. Following these cycles, the composite PCM showed a decrease of 5.08% and 3.83% in freezing and melting latent heat, respectively. The thermal conductivity of the composite increased by 36% due to the incorporation of GO, as confirmed by the accelerated melting and freezing processes. Based on these comprehensive findings, it can be concluded that the prepared CA-LA-MA/GO ternary eutectic composite holds great promise for applications such as low-temperature thermal energy storage, thermal energy conservation and management in buildings, and other potential fields.
کلیدواژههای انگلیسی مقاله
Ternary eutectic PCM,Graphene oxide,Thermal properties,Building thermal management,Thermal Energy Storage
نویسندگان مقاله
Sureshkumar Kanchipuram Ramalingam |
Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, INDIA
K. Gopi Kannan |
Department of Mechanical Engineering, Indian Institute of Technology (ISM) Dhanbad, INDIA
Ahmad Rifqi Muchtar |
Institute of Technology Bandung, Department of Engineering Physics, Bandung, INDONESIA
Sathyanarayanan Seetharaman |
Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, INDIA
Dhayalini Bala |
Assistant Manager, L&T construction Research and Testing center, Chennai, INDIA
Arun Balaji Subramanian |
Nanoampere Materials Private Ltd., Chennai, INDIA
Karthick Velu |
Centre for Ocean Research (DST-FIST) (MoES-ESTC cell), Sathyabama Institute of Science and Technology, Jeppiaar Nagar, Chennai, INDIA
Parameshwaran Rajagopalan |
Department of Mechanical Engineering, Birla Institute of Technology and Science-Pilani, Hyderabad Campus, INDIA
Kalaiselvam S |
Department of Applied Science and Technology, Anna University, Chennai, INDIA
نشانی اینترنتی
https://ijcce.ac.ir/article_708681_dc3918709e95b048e65ae2f7d7c1ad58.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات