|
مهندسی آبیاری و آب ایران، جلد ۱۴، شماره ۴، صفحات ۷۴-۹۰
|
|
|
عنوان فارسی |
استفاده از روش زمینآماری در برآورد هدایت هیدرولیکی و عمق لایه غیرقابل نفوذ و بررسی تاثیر آن بر فاصله زهکشها در حالت همگام و ناهمگام |
|
چکیده فارسی مقاله |
طراحی درست شبکههای آبیاری و زهکشی نیاز به برآورد دقیق پارامترهای مربوطه دارد که با استفاده از روشهای جدید تخمین این امر امکان پذیر میگردد، از پارامترهای مهمی که در تعیین فاصله زهکشها، موثر میباشند میتوان به عمق لایه غیرقابل نفوذ و هدایت هیدرولیکی منطقه اشاره نمود. از آنجا که روش-های جدید درونیابی بر پایه زمین آمار، با در نظر گرفتن تغییرات مکانی متغیرها نواقص روشهای کلاسیک را کاهش دادهاند. لذا در این تحقیق پارامتر عمق لایه غیر قابل نفوذ و هدایت هیدرولیکی به روشهای زمین آماری برآورد گردیده و با روش پولیگونبندی تیسن در تعیین فاصله زهکشها، که روش معمول در طرحهای زهکشی می باشد مقایسه گردید. نتایج نشان داد که در تعیین عمق لایه غیرقابل نفوذ و هدایتهیدرولیکی بهترتیب، روش کریجینگ ساده و کیریجینگ عمومی با ضریب تبیین 83/0 و 89/0ریشه میانگین مربعات خطا 26/0 و 67/2 (متر) دارای بهترین نتایج می باشند. همچنین بهترین نیمتغیرنما برازش داده شده به ترتیب نیمتغیرنما نمایی با اثر قطعهای صفر و سقف 37/1 و نیمتغیرنما کروی با سقف 027/0 و اثر قطعه ای 003/0 محاسبه گردید که نشان دهنده استحکام ساختار فضایی منطقه و تأثیر کامل مؤلفه ساختاردار بر مدل نیمتغیرنما منطقه بود. همچنین برآورد فاصله زهکشها، در حالت همگام و ناهمگام در روش کیریجینگ در اعماق مختلف نصب زهکشها، کمتر از روش تیسن برآورد گردید و با در نظر گرفتن مناطق با هدایت هیدرولیکی بیش از یک متر در روز، اختلاف دو روش در برآورد فاصله زهکشها به 11 درصد افزایش یافت. |
|
کلیدواژههای فارسی مقاله |
طراحی زهکشها،عمق لایه غیر قابل نفوذ،کیریجینگ،هدایت هیدرولیکی،بهینه سازی، |
|
عنوان انگلیسی |
Use Geostatistical Method in Estimating Hydraulic Conductivity and HardpanDepth and Investigating its Effect on Drains Distance in Uniform and Non-Uniform Condition |
|
چکیده انگلیسی مقاله |
Design of irrigation and drainage networks requires accurate estimation of relevant parameters, which is made possible using new estimation methods. Important parameters useful in determining drain spacing include the depth of the hardpan and the hydraulic conductivity of the area. New interpolation methods based on geostatistics take into account spatial variations in variables, thereby reducing the inaccuracies of traditional methods. Therefore, this study uses geostatistical and Thiessen's polygon methods, which is a common method in drainage design, to estimate hardpan depth and hydraulic conductivity parameters for estimating drainage distance. The results show that simple kriging and universal kriging methods with determination coefficients of 0.83 and 0.89 and root mean square errors of 0.26 and 2.67 (meters) achieve the best results for determining the depth and permeability of impermeable layers, respectively. Also, the best fitted variogram respectively were calculated as an exponential variogram with zero nugget effect and 1.37 sill and a spherical variogram with a sill of 0.027 and 0.003 nugget effect. showed the strength of the spatial structure of the area and the full impact of the structured component on the variogram model of the parameters. Also, the results showed that the distance of drains is uniform and non-uniform condition at different depths of the installation of drains, in kiriging method were calculated less than thiessen method. And with taking into account areas with hydraulic conductivity of more than one meter per day, the difference between the two methods in estimating the distance of the drains increased to 11%. |
|
کلیدواژههای انگلیسی مقاله |
طراحی زهکشها,عمق لایه غیر قابل نفوذ,کیریجینگ,هدایت هیدرولیکی,بهینه سازی |
|
نویسندگان مقاله |
یاسر حسینی | استاد دانشکده کشاورزی و منابع طبیعی مغان- دانشگاه محقق اردبیلی
|
|
نشانی اینترنتی |
https://www.waterjournal.ir/article_191650_d446b354cc5cd55c26997b607378901b.pdf |
فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
کد مقاله (doi) |
|
زبان مقاله منتشر شده |
fa |
موضوعات مقاله منتشر شده |
|
نوع مقاله منتشر شده |
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|