این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Iron and Steel Society of Iran، جلد ۱۳، شماره ۲، صفحات ۱-۶
عنوان فارسی Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Identification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel
چکیده انگلیسی مقاله Transformation induced plasticity (TRIP) steels have a vast application in automotive industry because of their
high strength, high ductility and hence excellent energy absorption capacity. These characteristics of TRIP
steels are due to the existence of retained austenite in their microstructures in the ambient temperature, which
transforms to the martensite phase during deformation. The microstructure of TRIP steel contains various phases
and in the past-published studies mainly the volume fraction of retained austenite was investigated and there
is not a quantitative comprehensive investigation about all phases in the microstructure of this steel. The main
goal in this study is a comprehensive qualitative and quantitative investigation in various phases of TRIP steel
microstructure. Therefore, a TRIP steel with chemical composition of 0.2C+ 1.43Si+ 1.58Mn was produced and
its complicated microstructure which contained ferrite, bainite, martensite and retained austenite was investigated
using X-Ray Diffractometry (XRD), optical microscopy (OM), field emission scanning microscopy (FE-SEM)
and Electron backscatter diffraction (EBSD). The OM and FE-SEM results were used only to qualitative studies
and identification of the morphologies of the phases but the EBSD results and functions were used to qualitative
and quantitative studies. The volume fractions of retained austenite, ferrite+bainite and martensite phases were
calculated and the amounts of 11%, 82% and 7% were obtained, respectively. The volume fraction of retained
austenite was also measured with XRD and the amount of 14.3% was obtained.
کلیدواژه‌های انگلیسی مقاله TRIP steel, XRD, FE-SEM, EBSD, Retained austenite
نویسندگان مقاله a مصطفی پور |
faculty of mechanical engineering, tabriz university
سازمان اصلی تایید شده: دانشگاه تبریز (Tabriz university)

a ابراهیم پور |
faculty of mechanical engineering, tabriz university
سازمان اصلی تایید شده: دانشگاه تبریز (Tabriz university)

t سعید |
faculty of material science engineering, sahand university of technology
سازمان اصلی تایید شده: دانشگاه صنعتی سهند (Sahand university of technology)

نشانی اینترنتی http://journal.issiran.com/article_23706_bdd6d21e6a5789c775d6d729a33f1a7e.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/419/article-419-316483.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات