Journal of Renewable Energy and Environment، جلد ۸، شماره ۳، صفحات ۲۶-۳۵

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی The Assessment of Effect of Fatty Acid Profile on the Physical Properties and Emission Characteristics of New Feedstocks Used for Biodiesel
چکیده انگلیسی مقاله The present study uses three generations of biodiesels and studies their effects on physical properties and exhaust gases. They are comprised of Palmaria palmate oil (third generation), Eucheuma spinosum oil (third generation), Eucheuma cottonii oil (third generation), Common wormwood oil (second generation), Marjoram oil (second generation), Peganum harmala oil (second generation), Zingiber officinale oil (first generation), Anethum graveolens oil (first generation), and Cacao bean oil (first generation). Results show that             first-generation oils gain a higher level of Calorific value around 41.16 MJ/kg than other generations. The longest carbon chain is observed by the first generation with higher unsaturated fatty acids than other generations (94.11 %). The first generation gains a higher level of density around 882 kg/m3 than other generations. Also, the first generation gains a higher level of flash point around 193 ˚C than other generations. The third generation gains a high level of cetane number at about 69, compared to other generations. The first generation gains a minimum level of cloud and pour point around -3 ˚C and -2 ˚C compared to other generations. Moreover, the third generation gains the lowest level of viscosity about 2.51 CSt compared to the first generation. The third generation gains the lowest level of NOx around 371 ppm compared to other generations. Finally, the third generation gains the lowest level of soot, CO, and HC around 0.47 Vol. %, 0.018 Vol. %, and 4.82 ppm, compared to other generations.
کلیدواژه‌های انگلیسی مقاله physical properties,Chemical properties,three different biodiesel generation,emissions

نویسندگان مقاله Farid Jafarihaghighi |
Department of Chemical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Tehran, Iran.

Hasanali Bahrami |
Department of Mechatronics, Arak University, Arak, Markazi, Iran.

Mehdi Ardjmand |
Department of Chemical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Tehran, Iran.

Mehrdad Mirzajanzadeh |
Department of Chemical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Tehran, Iran.


نشانی اینترنتی https://www.jree.ir/article_129680_38426761a3e2a5cb13e6b9cc0ce0aec1.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات