این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۳۹، شماره ۴، صفحات ۳۵۵-۳۷۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Methanolysis Optimization of Cottonseed Oil to Biodiesel Using Heterogeneous Catalysts
چکیده انگلیسی مقاله This paper presented the process optimization for heterogeneous catalysts transesterification of refined cottonseed oil catalyzed by calcium oxide (CaO) and magnesium oxide (MgO) impregnated on Saw Dust Ash (SDA) using Response Surface Methodology Central Composite Design (RSMCCD). The five transesterification process variables studied were: catalyst concentration (4-8 wt% oil), methanol/oil molar ratio (4:1-8:1), reaction temperature (45-85oC), reaction time (3-5h), and agitation speed (200-300rpm). It was revealed that the reaction temperature gave the most significant effect on the yield of Fatty Acid Methyl Ester (FAME), followed by methanol/oil molar ratio. There were also significant interaction effects between catalyst concentration and methanol/oil molar ratio, catalyst concentration and agitation speed, methanol/oil molar ratio and reaction temperature, methanol/oil molar ratio and reaction time, methanol/oil molar ratio and agitation speed, reaction time and agitation speed for CaO/SDA transesterified reaction while for MgO/SDA transesterified reaction the significant interaction effect between variable is methanol/oil molar ratio and reaction time. Based on the optimized conditions, the highest yield of 90% for CaO/SDA transesterified reaction and 77% for MgO/SDA transesterified reaction were predicted using the following variables catalyst concentration, CaO/SDA = 6wt% and MgO/SDA = 8wt%, methanol/oil molar ratio = 6:1(CaO/SDA) and 8:1 (MgO/SDA), reaction temperature = 65oC, reaction time = 4h and agitation speed = 250rpm. Experimental validation of the predicted optimum conditions gave an actual yield of 86% (CaO/SDA) and 73.3% (MgO/SDA). The small errors between the predicted and actual optimum yield (4.7% (CaO/SDA) and 5.2% (MgO/SDA)) indicated that the model were valid and accurate in representing the actual experimental values and also in predicting yield at any conditions within the range studied. 

The results proved the efficacy of saw dust ash impregnated with CaO and MgO in transesterification reaction.
کلیدواژه‌های انگلیسی مقاله Refined cottonseed oil,saw dust ash,free fatty acid methyl ester,Response surface methodology,Central composite design,Heterogeneous catalysts
نویسندگان مقاله Callistus Nonso Ude |
Department of Chemical Engineering, Michael Okpara University of Agriculture, Umudike, Umuahia, NIGERIA

Okechukwu Dominic Onukwuli |
Department of Chemical Engineering, Nnamdi Azikiwe University (NAU), Awka, NIGERIA

Boniface Ifeanyi Ugwu |
Department of Chemical Engineering, Michael Okpara University of Agriculture, Umudike, Umuahia, NIGERIA

Chinenye Faith Okey-Onyesolu |
Department of Chemical Engineering, Nnamdi Azikiwe University (NAU), Awka, NIGERIA

Timothy Amechi Ezidinma |
Department of Chemical Engineering, Institute of Management & Technology (I.M.T), Enugu, NIGERIA

Paul M Ejikeme |
Department of Pure and Industrial Chemistry, University of Nigeria, Nsukka, NIGERIA

نشانی اینترنتی https://ijcce.ac.ir/article_43368_914342325acc3d63bf506126a077bf5e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات