این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۰، شماره ۵، صفحات ۱۶۶۵-۱۶۷۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Process Simulation of Ethanol Production from Jerusalem Artichoke Stalk
چکیده انگلیسی مقاله Lignocellulosic biomass can serve as raw material for ethanol production. However, lignocellulosic biomass is a complex mixture of carbohydrates that need additional processes for efficient ethanol production, such as pretreatment and hydrolysis before fermentation into ethanol. Therefore, this work mainly focused on the creation and simulation of a model of ethanol production from Jerusalem Artichoke Stalk (JAS) following experimental data and using the commercial software ASPEN Plus with and without a Heat Exchanger Network (HEN). Alkaline Hydrogen Peroxide(AHP)  pretreatment was the first step for this process. The optimal conditions of AHP were a mixture of 2% w/w sodium hydroxide (NaOH) and 4% v/v hydrogen peroxide (H2O2) at 10% (w/v) solid-liquid ratio and 121°C for 90 min. After treatment, 10% AHP-JAS loading was fed to enzymatic hydrolysis at 50°C and the fermentation process at 30°C. The simulation suggested that a feedstock of 60,000 kg of JAS could yield 3,482.16 kg ethanol. The purification section by the extractive distillation system had 12 stages, a distillate to feed mole ratio (D/F) of 0.13, and a reflux mole ratio (R/R) of 1.5. The purity of the ethanol product was higher than 97 wt%. After the model simulation, HEN was designed by using Aspen Energy Analyzer. After the installation of HEN in this process, the ethanol plant with HEN showed a better result, which at 16.24 percentages reduced total cost compared to the process without HEN. 
کلیدواژه‌های انگلیسی مقاله Lignocellulosic biomass,Jerusalem artichoke stalk,Ethanol production simulation,Alkaline hydrogen peroxide pretreatment,Aspen Plus
نویسندگان مقاله Opor Laosiriwut |
Chemical Engineering, Center for Advanced Study in Industrial Technology, Faculty of Engineering, Kasetsart University, Bangkok 10900, THAILAND

Penjit Srinophakun |
Chemical Engineering, Center for Advanced Study in Industrial Technology, Faculty of Engineering, Kasetsart University, Bangkok 10900, THAILAND

Thongchai Rohitatisha Srinophakun |
Chemical Engineering, Center for Advanced Study in Industrial Technology, Faculty of Engineering, Kasetsart University, Bangkok 10900, THAILAND

Chen-Guang Liu |
State Key Laboratory of Microbial Metabolism, and School of Life Sciences & Biotechnology, Shanghai Jiao Tong University, Shanghai 200240, P.R. CHINA

Feng-Wu Bai |
State Key Laboratory of Microbial Metabolism, and School of Life Sciences & Biotechnology, Shanghai Jiao Tong University, Shanghai 200240, P.R. CHINA

Yusuf Chisti |
Institute of Technology and Engineering, Massey University, Private Bag 11 222, Palmerston North 4474, NEW ZEALAND

نشانی اینترنتی https://ijcce.ac.ir/article_40341_5cbbbe26e4bc78a50490e266e1709dbb.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات