این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۱، شماره ۷، صفحات ۲۴۱۷-۲۴۲۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Improvisation of Combustion Behaviour of Jojoba Oil Diesel Blend Fuelled di Diesel Engine by Engine Modifications Such as MOP and TBC
چکیده انگلیسی مقاله To reduce the importance of fossil fuels, the identification of biofuels plays a vital role. The plant oil chosen for this study is novel plant oil named Jojoba oil (the botanical name is Simmondsia Chinensis).  To utilize this type of oil in higher proportion to diesel, engine modifications were carried out. The engine modifications include optimizing salient operating parameters with Thermal Barrier Coating (TBC). Taguchi and Gray relational methods were used for finding the optimized values of salient operating parameters like injection pressure, compression ratio, injection timing, and intake air temperature as 275 bar, 19.5 CR, 27.5 bTDC, and 65˚C, respectively [1]. This has helped to combust the higher blends of jojoba oil, namely 60J, 70J, and 80J, without adverse performance and emission characteristics. The fundamental aim of coating Aluminium oxide, Molybdenum, and Titanium oxide (40%, 30%, and 30%) on the inner surface of the piston crown and the cylinder head is to retain heat and thereby achieve higher thermal efficiency.  Combustion, performance, and emission analysis were done and found that 60% by volume of jojoba oil can be applied in a TBC engine which offers 11.5% higher BTE, 74.3% lower CO, 31.2% lower HC, 8.6% higher NOx and 25.9% lower smoke than 70% and 80% by volume of jojoba oil.
کلیدواژه‌های انگلیسی مقاله Jojoba oil,combustion,Thermal barrier coating,Emission,Performance
نویسندگان مقاله Devan P K |
Department of Mechanical Engineering, RMK College of Engineering and Technology, Chennai, INDIA

Chidambaranathan Bibin |
Department of Mechanical Engineering, RMK College of Engineering and Technology, Chennai, INDIA

GOPINATH S |
Department of Mechanical Engineering, RMK College of Engineering and Technology, Chennai, INDIA

C. Ramakrishnan |
Department of Mechanical Engineering, Sri Nallalaghu Nadar Polytechnic College, Chennai, INDIA

نشانی اینترنتی https://ijcce.ac.ir/article_245940_0ec6f00fe9117444a798f76a3d5c73bb.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات