این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Iranian Journal of Chemistry and Chemical Engineering
، جلد ۴۱، شماره ۱۲، صفحات ۴۲۳۴-۴۲۴۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Design of Industrial Water-Based Polymerization Agitated Vessel by CFD Simulation
چکیده انگلیسی مقاله
A
gitated vessels are frequently used equipment in industries, especially in polymer processes.
In the present work, the
CFD simulation technique was used to study the effect of
impeller shapes in the industrial scale water-based polymers agitated vessels to increase mixing efficiency. The VOF multiphase approach and
turbulent model were used to study the hydrodynamic behavior of fluids in the vessel. The simulations were done in four designs, including designs A, B, C, and D. Designs A and B had three curved impellers with two
blades
for each one and one straight impeller at the vessel bottom. Results showed that in designs A and B
,
the gas phase entered the liquid
(polymer) phase and caused foaming liquid. In design C,
a geometrical modification was done by removing the top curved impeller, adding a blade for curved
impellers, and reducing of curved blade angle from
to
. Results showed that wide rotational zones were achieved (about 75% of the liquid phase), and the liquid foaming problem was solved in design C. The modification of the bottom impeller in design D showed that the rotational zones
cover
about 95% of the entire liquid phase, which is the best performance
compared to other
designs
. Also, the performance of
design D
was evaluated
at the viscosity
values, including
7,4,1 kg/m.s,
and
mixing quality was validated at these values.
کلیدواژههای انگلیسی مقاله
CFD Simulation,Mixing,Agitated vessel,RNG k-ε model,Water-based polymer
نویسندگان مقاله
Amir Heidari |
Process Simulation and Modeling Laboratory, Faculty of Chemical, Petroleum and Gas Engineering, Semnan University, Semnan, I.R. IRAN
Samrand Karim Nejadian |
Process Simulation and Modeling Laboratory, Faculty of Chemical, Petroleum and Gas Engineering, Semnan University, Semnan, I.R. IRAN
نشانی اینترنتی
https://ijcce.ac.ir/article_252279_1cf39d7fa82b1d3cdd676257973ea5a2.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات