|
|
International Journal of Engineering، جلد ۳۴، شماره ۸، صفحات ۱۸۸۸-۱۸۹۷
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies |
|
| چکیده انگلیسی مقاله |
ZnO nanoparticles were prepared by direct thermal decomposition of the precursor [contain: Zn4(SO4)(OH)6.H2O and ZnO] in air for 1 h at 875°C. The pH of the precursor solution was set on 6 and 11 by the controlled addition of the NH3•H2O solution. The as-prepared materials were characterized by X-ray diffraction (XRD), infrared spectrum (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). According to the analyses, the ZnO nanoparticles were pure with both rod-like and spherical shapes which were synthesized using chloride and sulfate solutions, respectively. Moreover, the average diameter of spherical ZnO synthesized at pH=6 was around 85±5 nm, while, in an average, the nanorods had 980 nm in diameter and 2.2 μm in length. The average nanorods at pH=11 were 760 nm in diameter and 3.3 μm in length, while the average particle size of spherical particles was around 112±5 nm. The TEM and SEM image showed the morphology of spherical and nanorods particles. The reaction temperature of all steps during the synthesis of ZnO nanopowders shifted to the higher temperature, as the pH of the starting solution increased from 6 to 11. Due to the simplicity, the present method could be proposed as a convenient way to produce pure ZnO nanoparticles using ZnSO4 and ZnCl2 solutions without using any toxic and organic chemicals. |
|
| کلیدواژه‌های انگلیسی مقاله |
Thermal decomposition,Semiconductor,Phase transformation,Zinc oxide,Chemical synthesis |
|
| نویسندگان مقاله |
E. Darezereshki |
Department of Materials Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
A. Behrad Vakylabad |
Department of Materials, Institute of Science and High Technology and Environmental Sciences, Graduate University of Advanced Technology, Kerman, Iran
M. Yousefi |
Department of Materials Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
|
|
| نشانی اینترنتی |
https://www.ije.ir/article_133292_0295c634bfbebfc44e2875764b42368f.pdf |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|