این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۴، صفحات ۷۹۴-۸۰۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review
چکیده انگلیسی مقاله In this 21st century, various materials like metals, alloys, and composites are available for different industrial applications. Composite materials are gaining popularity due to their enhanced mechanical properties over other materials. However, for continuous improvement in the properties of these materials, different research groups are constantly inVolved in it. In this research paper, the focus is to review the mechanical properties like hardness, tensile strength, flexural strength, impact strength along with surface characteristics like wear resistance of AMMC’s. As per the available literature, liquid state processing is more popular than solid-state processing due to the better dispersion of the reinforcement particles in the matrix materials. Stir casting is mostly used liquid state processing method because of its ease and the overall low cost of production. It has been noticed that the mechanical and surface characteristics of AMMC’s can be improved by adding different reinforcement particles in small percentages (usually 0.5-20%). It has been observed that hardness, tensile strength, and flexural strength for mostly used AMMC’s ranges from 38-99.6 HV, 100-478 MPa, and 199.52-430 MPa respectively. This research paper also included the influence of various working parameters on the wear rate of AMMC’s. It is noticed that wear loss for AMMC’s generally varies from 0.0050-0.004 g. The impact resistance is a crucial parameter in the study of AMMC’s used for aerospace and automotive applications and it has been noticed that its value for popular AMMC’s varies from 3.6-38 J.
کلیدواژه‌های انگلیسی مقاله Aluminum Metal Matrix Composites,Reinforcements,stir casting,Mechanical properties,Wear
نویسندگان مقاله D. Kumar |
Mechanical Engineering Department, National Institute of Technology Kurukshetra, Haryana, India

S. Angra |
Mechanical Engineering Department, National Institute of Technology Kurukshetra, Haryana, India

S. Singh |
Mechanical Engineering Department, National Institute of Technology Kurukshetra, Haryana, India

نشانی اینترنتی https://www.ije.ir/article_143543_8706c4c558a3c678e60e6a488cca569c.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات