این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۷، صفحات ۱۲۴۶-۱۲۵۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy
چکیده انگلیسی مقاله The Jakarta Government Hospital provides cancer services with several available types of equipment, one of which is the Linear accelerator (LINAC) Synergy Platform (SP) machine. The phenomenon of this machine experiencing a low effectiveness value because it is not able to handle the patient queue so it is not able to reduce the severity of cancer. The purpose of this study was to determine the factors causing the low value of Overall Equipment Effectiveness (OEE) and provide suggestions for improvement to increase the OEE value. The new approach of this research is using the Total Productive Maintenance (TPM) approach with OEE analysis as a success parameter because TPM is more identical in the manufacturing industry. Another update is using Failure Mode and Effect Analysis (FMEA) through Focus Group Discussions (FGD) with experts. The results of the study found that the factors that influenced the low OEE value on the LINAC SP machine were caused by breakdown loss of 76.29%, setup loss of 9.59%, idling and minor stop of 8.80%, and a decrease in speed of 5.29%. The continuous and consistent implementation of the TPM Pillar has increased the OEE value of the LINAC SP machine.
کلیدواژه‌های انگلیسی مقاله Health Service,Linear accelerator,Overall Equipment Effectiveness,Six Big Losses,Total Productive Maintenance
نویسندگان مقاله D. I. Sukma |
Industrial Engineering Depertment, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

H. A. Prabowo |
Industrial Engineering Depertment, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

I. Setiawan |
Industrial Engineering Depertment, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

H. Kurnia |
Industrial Engineering Depertment, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

I. M. Fahturizal |
Industrial Engineering Depertment, Faculty of Engineering, Universitas Mercu Buana, Jakarta, Indonesia

نشانی اینترنتی https://www.ije.ir/article_147170_b954331f3dca1a607ef7efce589890e1.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات