این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Polyolefins Journal، جلد ۱۰، شماره ۳، صفحات ۱۲۷-۱۳۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Failure behavior of high density polyethyene and high impact polystyrene: An experimental study by the damage methods
چکیده انگلیسی مقاله This work focuses on the damage of two thermoplastic materials; high density polyethylene "(HDPE)" and high impact polystyrene "(HIPS)". The contribution of this work is to determine the lifetime of these polymers by proposing a new static method, including different notches with different opening lengths instead of depth change, to predict the damage behavior of HDPE and HIPS. Three damage models were used to predict the lifetime of these polymers by a proposed simple method compared to the old complex methods. Chemical and microscopic analyses including Fourier transform infrared spectrometry (FTIR) and scanning electron microscopy (SEM) were performed. The results indicated that the shape of the notch and the morphological nature of the polymer influence the mechanical behavior of these polymers. The proposed experimental factors (life fraction as a function of notches) are in very good agreement with the experimental results.
کلیدواژه‌های انگلیسی مقاله HDPE, HIPS, models of damage, SEM, FTIR, tensile tests
نویسندگان مقاله Rabiaa El Kori |
Laboratory of Mechanics, Engineering and Innovation, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca (UH2C), Maarif Casablanca 20100, Morocco

Amal Lamarti |
Laboratory of Mechanics, Engineering and Innovation, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca (UH2C), Maarif Casablanca 20100, Morocco

Houda Salmi |
Laboratory of Mechanics, Engineering and Innovation, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca (UH2C), Maarif Casablanca 20100, Morocco

Abdelilah Hachim |
Laboratory of Mechanics, Engineering and Innovation, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca (UH2C), Maarif Casablanca 20100, Morocco

Khalid El Had |
Laboratory of Mechanics, Engineering and Innovation, National Higher School of Electricity and Mechanics, Hassan II University of Casablanca (UH2C), Maarif Casablanca 20100, Morocco

نشانی اینترنتی http://poj.ippi.ac.ir/article_1932_d0118460df629cdc59b388397228ce6b.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات