این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۹، شماره ۱، صفحات ۳۱-۴۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Application of Modified Chebyshev Points to Decrease Residual Stress Noises in Hole-Drilling Method
چکیده انگلیسی مقاله The uncertainty on the values of the measured residual stresses in hole-drilling integral method, the most widely used technique for measuring residual stress, will be called hereinafter as residual stress noises, which initiate high sensitivity of stress to strain measurement errors due to ill-conditioning of inverse integral equations. This study aimed to investigate the use of Chebyshev points to decrease residual stress noises in the hole drilling method. The Chebyshev points were extended to hole-drilling increments from surface to specified interior depth. The bending of an aluminum beam was used to validate the extended method, and the results were compared with the standard reduction noises technique, Tikhonov-Morozov, and optimum steps technique. The result obtained from the extended method was shown to lead not only an accurate determination of de-noised residual stress, but also a simple calculation procedure in comparison with the Tikhonov-Morozov and optimal steps method. The results indicate that the use of modified Chebyshev points decreased the mean absolute error of residual stress to 8.17 MPa from 14 MPa in Tikhonov-Morozov and 10.52 MPa in optimum steps methods.
کلیدواژه‌های انگلیسی مقاله Chebyshev points, Hole-drilling, Residual Stress, Optimal steps, Tikhonov-Morozov
نویسندگان مقاله Behnoud Salehebrahimnejad |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

Ali Doniavi |
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

Mehran Moradi |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, 84156-83111, Iran

Mehrdad Shahbaz |
Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, Urmia, Iran

نشانی اینترنتی https://ijmf.shirazu.ac.ir/article_6542_6c8c6fc0287e6531d4eadca9889efd08.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات