طلوع بهداشت یزد، جلد ۲۰، شماره ۴، صفحات ۷۹-۹۳

عنوان فارسی بررسی کارایی فرایند جذب Zeolite@ZnO در حذف رنگ متیلن بلو از محلول‌های آبی
چکیده فارسی مقاله مقدمه:رنگ ها موادی با ساختار پیچیده بوده که از طریق فرایند نساجی نظیر رنگرزی و شستشو، به محیط زیست وارد می شوند. این مطالعه با هدف بررسی کارایی فرایند  جذب در حضور Zeolite@ZnO  در حذف رنگ متیلن بلو از فاضلاب سینتیک نساجی انجام گرفت. روش بررسی: ساختار و مرفولوژی نانوذره با استفاده از تکنیک هایXRF,FTIR  و FESEM بررسی شد. غلظت رنگ با استفاده از دستگاه اسپکتروفتومتر در طول موج nm664 تعیین گردید. در این مطالعه متغیرهای زمان واکنش، pH محلول،دوز یا مقدارجاذب و غلظت رنگ مورد ارزیابی قرار گرفت. برای تعیین ایزوترم و سینتیک جذب از دو مدل ایزوترمی لانگمویر و فروندلیچ و مدل های سینتیکی شبه درجه اول و دوم استفاده گردید. یافته ها: ما دریافتیم که شرایط بهینه  غلظت 50 میلی گرم برلیتر، دوز جاذب1گرم بر لیتر، pH برابر 11 و زمان واکنش 60 دقیقه بود و راندمان حذف در شرایط بهینه برای متیلن بلو 8/95 % حاصل شد. نتیجه گیری: نتایج حاصل از مطالعه ایزوترم و سینتیک جذب برای متیلن بلو نشان داد که فرآیند جذب از ایزوترم لانگمویر و سینتیک شبه درجه دوم تبعیت می‌کند. ظرفیت جذب بیشینه جاذب با استفاده از مدل لانگمویر برابر62/384میلی گرم بر گرم تعیین شد.
کلیدواژه‌های فارسی مقاله متیلن بلو، جذب سطحی، سنتز،، Zeolite@Znزئولیت

عنوان انگلیسی Evaluation of the Efficiency Adsorption Process with Zeolite@ in the Removal of Methylene Blue Dye from Aqueous Solutions
چکیده انگلیسی مقاله Introduction: Dyes are materials with a complex structure that enter the environment from textile processes such as dyeing and washing. The aim of this study was to investigate the efficiency of the absorption process using Zeolite @ ZnO in removing methylene blue dye from textile wastewater. Methods: The structure and morphology of nanoparticles were examined using XRF, FTIR and FESEM techniques. Dye concentrations were determined using a spectrophotometer at 664 nm. In this study, the variables of reaction time, solution pH, adsorbent amount, and dye concentration were evaluated. To determine the isotherm and adsorption kinetics, two isotherm models of Langmuir and Freundlich ,and two kinetics models pseudo-first order ,and pseudo-second order were used. Results: It was found that optimal conditions were concentration of 50 mg/l, adsorbent dose of 1 g/l, pH of 11, and a reaction time of 60 minutes.  The removal efficiency under optimal conditions for methylene blue was 95.8%. Conclusion: The results of the isotherm and absorption kinetics study for methylene blue showed that the adsorption process follows the Langmuir isotherm and quasi-quadratic kinetics. The maximum adsorption capacity of the adsorbent was determined to be 384 mg/g using the Langmuir model.      
کلیدواژه‌های انگلیسی مقاله Methylene Blue, Adsorption, Zeolite@ZnO, Zeolite

نویسندگان مقاله مهدی وثوقی | Mehdi Vosoughi
Ardabil university of medical sciences
دانشگاه علوم پزشکی اردبیل

نگار عین اله زاده | Negar Einollahzadeh
Ardabil university of medical sciences
دانشگاه علوم پزشکی اردبیل


نشانی اینترنتی http://tbj.ssu.ac.ir/browse.php?a_code=A-10-2753-1&slc_lang=fa&sid=1
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده تخصصی
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات