این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Computational and Applied Research in Mechanical Engineering - JCARME، جلد ۹، شماره ۲، صفحات ۳۷۱-۳۸۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Design and Fabrication of an Effective Micromixer through Passive Method
چکیده انگلیسی مقاله Micromixer is a significant component of microfluidics particularly in lab-on-chip applications so that there has been a growing need for design and fabrication of micromixers with a shorter length and higher efficiency. Despite most of the passive micromixers that suffer from long mixing path and complicated geometry to increase the efficiency, our novel design suggests a highly efficient micromixer while taking advantage of having a short length. The novelty of our work stems from utilizing all three mixing techniques of injection, recombination, and zigzag mixing resulting in benefits such as multi-flow lamination and flow resistance reduction in microscale. Moreover, the contraction and expansion of the microchannel width improve mixing. The present work deals with the parametric study, numerical simulation, as well as experimental tests and characterization of small planar passive micromixer. The high mixing efficiency yield of 98.02 was obtained with the length of only 1857.8 microns which shows good agreement in comparison with numerical simulation.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Mahdi Moghimi |
Iran university of science and technology Mechanical Engineering Department

Naeem Jalali |
Mechanical engineering department, Iran university if science and technology

نشانی اینترنتی http://jcarme.sru.ac.ir/article_1100_ff70259c559b37bf4498e2e222684b18.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/484/article-484-2251067.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات