این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Chemical and Petroleum Engineering، جلد ۵۲، شماره ۲، صفحات ۱۵۷-۱۶۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Different Additives on Separation Performance of Flat Sheet PVDF Membrane Contactor
چکیده انگلیسی مقاله This paper investigates effects of different additives on morphology and subsequently, separation performance of asymmetric flat sheet Polyvinylidene fluoride (PVDF) membranes to separate CO2 using membrane contractor. Five different additives from different chemical families including Lithium chloride (salt), Polyethylene glycol 400 (polymer), glycerol (weak anti-solvents), methanol (alcohols) and acetic acid (weak secondary solvents) were used for controlling the morphology of the fabricated membranes. The fabricated PVDF membranes were applied to separate CO2 from a gas mixture of (20/80 wt/wt) CO2/N2 by contacting with (20/80 wt/wt) Monoethanolamine/H2O as absorbent. The investigations revealed that among the all considered additives, glycerol has the most promising effect on the performance of CO2 separation from the feed gas mixture. Effects of operational parameters such as flow rate and temperature of absorbents on the separation performance were also studied. Investigations showed that the lowest level of temperature (30 ºC) and the highest level of the flow rate of absorbent (500 ) provide better separation performance. Additionally, the presence of glycerol increased absorption performance (η) from 0.63 to 0.78 (at the lowest level of flow rate) and from 0.79 to 0.91 (at the highest level of flow rate) compared to the bare PVDF membranes.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Mohammad Khosravi |
School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Ali Ghadimi |
Department of Petrochemicals Synthesis, Iran Polymer and Petrochemical Institute, Tehran, Iran

Zahra Mansourpour |
School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Azadeh Ghaee |
Department of life science engineering, Faculty of new sciences and technologies, University of Tehran, Tehran, Iran

Behrouz Sadatnia |
Department of Biomaterials, Iran Polymer and Petrochemical Institute, Tehran, Iran

نشانی اینترنتی https://jchpe.ut.ac.ir/article_68775_144d09ae60d12d2cefe3fd8b20580782.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات