|
|
International Journal of Engineering، جلد ۲۵، شماره ۴، صفحات ۲۵۹-۲۶۸
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Modified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution |
|
| چکیده انگلیسی مقاله |
In this study, the adsorption behavior of anionic dyes from aqueous solution onto mesoporous carbon material (CMK-1) and modified with polymer (PANI/CMK-1) has been investigated as a function of parameters such as adsorbent dose (0.08-0.8 g/L), solution pH 3–10, contact time and initial concentration (10-100 mg/L). The influence of these parameters on the adsorption capacity has been studied using the batch process. The experimental data were analyzed by the Langmuir and Freundlich isotherms. The adsorption isotherm was found to follow the Freundlich model.The structural order and textural properties of the synthesized materials were studied by XRD, SEM, and nitrogen adsorption–desorption analysis. The characteristic results indicated that the modification was successfully done. This study showed that modified nanoporous carbon materials are excellent adsorbents for the removal of anionic dyes from wastewater. |
|
| کلیدواژه‌های انگلیسی مقاله |
Adsorption, anionic dye, Mesoporous carbon, Polymer, Removal |
|
| نویسندگان مقاله |
Arezo Ghaffari |
Chemistry, Iran University of Science and Technology
Mansoor Anbia |
Research Laboratory of Nanoporous Materials, Iran University of Science and Technology
|
|
| نشانی اینترنتی |
http://www.ije.ir/article_72032_0e9c945ecbfce4ebd62263e63b87f4c1.pdf |
| فایل مقاله |
اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062980.pdf |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|