این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۲۷، شماره ۲، صفحات ۳۴۱-۳۴۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube
چکیده انگلیسی مقاله Abstract An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ultrasonic device in two steps method. In this study, the effect of different parameters such as tube inclination, nanofluid weight fraction and Reynolds number on heat transfer coefficient was considered. Results show that the heat transfer coefficient of nanofluid with deferent weight fractions increases with the increase of Reynolds number inside horizontal and inclined round tubes. Also, increasing tube inclination from zero to 60 degree enhances slightly the heat transfer coefficient at same Reynolds number.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله M.A. Akhavan Behabadi |
MECHANICAL ENGINIEERING, School of Mechanical Engineering

MAHDI PIRHAYATI |
Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University

MORTEZA KHAYAT |
Department of Mechanical and Aerospace Engineering, Science and Research branch, Islamic Azad Universi

نشانی اینترنتی http://www.ije.ir/article_72260_39351212822be2e6f8f6c6db5bb6a063.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062791.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات