|
|
International Journal of Engineering، جلد ۲۷، شماره ۳، صفحات ۴۷۵-۴۸۶
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings |
|
| چکیده انگلیسی مقاله |
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which represents a solution approach based on the direct variational method allied with use of the Ritz approximation; while the second one is based on a linear estimating function. Unlike previous methods, in which the variation of stress through the thickness of adhesive is neglected or is assumed to be linear and they cannot be used to analyze the joints with thick adhesive layers; considering the effects of adhesive thickness makes it possible to employ present method to analyze the joints with thick adhesive layers as well as thin ones. |
|
| کلیدواژه‌های انگلیسی مقاله |
|
|
| نویسندگان مقاله |
Seyed Abdolmajid Yousefsani |
Mech. Eng., Ferdowsi University of Mashhad (FUM)
Masoud Tahani |
Mecanical Engineering, Ferdowsi University of Mashhad
Ehsan Selahi |
Mech. Eng., Ferdowsi University of Mashhad (FUM)
|
|
| نشانی اینترنتی |
http://www.ije.ir/article_72276_cb9ce3a50528a4e3bcdc3b0c4c802aea.pdf |
| فایل مقاله |
اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062771.pdf |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|