International Journal of Engineering، جلد ۳۰، شماره ۲، صفحات ۳۲۱-۳۲۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A Strain Range Dependent Cyclic Plasticity Model
چکیده انگلیسی مقاله Hysteresis loop curves are highly important for numerical simulations of materials deformation under cyclic loadings. The models mainly take account of only the tensile half of the stabilized cycle in hysteresis loop for identification of the constants which don’t vary with accumulation of plastic strain and strain range of the hysteresis loop. This approach may be quite erroneous particularly if the mean stress is not small and the effect of isotropic hardening is large. A strain dependent cyclic plasticity model which considers the variation of material constants versus strain range and accumulation of plastic strain has been proposed and experimentally investigated by the authors. In this paper it is proved that their proposed model is accurate for simulating all cycles of the hysteresis loop regardless of the strain range of the test. It is shown in this work that artificial neural network (ANN) model, if designed and trained properly, can be used for interpolating and extrapolating the experimental data. The results of this work are compared with two well-known cyclic plasticity models. The results also indicate that there is a remarkable agreement between the proposed model and ANN within and outside the strain ranges used in the experiments.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله G. H. Majzoubi |
Mechanical Engineering, Buali Sina University of Hamadan

Ehsan Khademi |
Robotics, Hamedan University of Technology (HUT)

N Bonora |
, Casyino universit

نشانی اینترنتی http://www.ije.ir/article_72891_463f17664e73a067c3dbe48572f32bcf.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2062162.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات