این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۱، شماره ۳، صفحات ۴۸۷-۴۹۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold
چکیده انگلیسی مقاله Plastic injection is a method in which, with using an extruder in granules, plastic is injected in a hole with high pressure. Because of meeting the two flow fronts in this process welding line will be made. Along the welding line the strength of produced part is low; therefore the position of welding line and its clarity are very important. In this paper, analyzes have been done with Fluent and Mold Flow softwares. In addition, verification of these analyzes have been done with practical experiments in order to study the effect of injection pressure and temperature on the welding line and its clarity. The materials used in these experiments are ABS and PP. Results show that applying different injection pressure and temperatures affects the strength of the produced part.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله Siamak Mazdak |
mechanical Engineering, Tafresh University

zahra baniamerian |
Mecanical Engineering, Tafresh University

Siavash Rahimi |
mechanical Engineering, Tafresh University

Ebrahim Sharifi Tashnizi |
mechanical Engineering, Tafresh University

نشانی اینترنتی http://www.ije.ir/article_73143_2b82c4629c585426d5455f46be983ce4.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/409/article-409-2061899.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات