Journal of Kerman University of Medical Sciences، جلد ۲۶، شماره ۵، صفحات ۳۳۰-۳۳۸

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی In Vitro Evaluation of Fracture Resistance of Zirconia Restorations Veneered by Two Different Systems: Rapid Layer Technique and Zir/CAD/CAM
چکیده انگلیسی مقاله Background: This study aimed to assess the fracture resistance of zirconia restorations fabricated with rapid layer (RL group) technique and zirconia computer-aided design/computer-aided manufacturing (zir/CAD/CAM) system (ZC group). Methods:This study evaluated 30 all-ceramic crowns in two groups of 15. After fabricating the metal dies and scanning them by the CAD/CAM scanner, the crowns in RL group were anatomically designed and divided into two parts of the core and the veneering. Each part was milled separately by the machine. The core and the veneering were fabricated and cemented. An index was obtained from the restorations and used for the fabrication of samples in the ZC group. In the latter group, the metal dies were scanned and zirconia cores were milled by the machine. The veneering porcelain powder was then applied. Samples in both groups were cemented over metal dies using a glass ionomer cement. The fracture resistance of the complex was measured by a universal testing machine. Data were analyzed using SPSS software version 16. Results:The mean fracture resistance of RL and ZC groups was not significantly different (P>0.05). The mode of failure was adhesive in all samples in RL group and cohesive in 85% of samples in ZC group. The remaining samples in ZC group showed a total fracture in the core and the veneering. Conclusion: The fracture resistance of restorations fabricated by the zir/CAD/CAM and RL systems is not significantly different.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله Pegah Radan |
MSc, Assistant Professor, Department of Prosthodontics, School of Dental Medicine, Arak University of Medical Sciences, Arak, Iran

Fariborz Vafaee |
MSc, Associate Professor, Implant Research Center, Department of Prosthodontics, School of Dental Medicine, Hamedan University of Medical Sciences, Hamedan, Iran

Farnaz Firouz |
MSc, Assistant Professor, Department of Prosthodontics, School of Dental Medicine, Hamedan University of Medical Sciences, Hamedan, Iran

Ali Reza Soltanian |
PHD, Assistant Professor, Department of Biostatistics, School of Public Health, Hamadan University of Medical Sciences, Hamedan, Iran

Bijan Heidari |
MSc, Assistant Professor, Implant Research Center, Department of Prosthodontics, School of Dental Medicine, Hamedan University of Medical Sciences, Hamadan, Iran


نشانی اینترنتی http://jkmu.kmu.ac.ir/article_89540_b828ac366b1257e6f5f86c8927a499d7.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/93/article-93-2053051.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات