این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Iron and Steel Society of Iran، جلد ۱۶، شماره ۱، صفحات ۱-۱۱
عنوان فارسی Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
چکیده فارسی مقاله One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored in an API X120 grade, advanced, High-Strength, Low-Alloy (HSLA) steel with an initial cold-deformed martensite microstructure. The steel sheet was the subject of a conventional cold rolling process for moderate true strain of 60% followed by isothermal recrystallization for different temperature-time combinations. Optical microscopy and scanning electron microscopy were used to characterize the microstructural evolutions, and the recrystallization kinetics was evaluated by hardness measurements with the aid of the Johnson-Mehl-Avrami-Kolmogorov (JMAK) relationship. The experimental results indicated that annealing at 948 K (675 °C) for 18 h is the optimum condition to achieve a grain-refined ferrite microstructure with an averaged grain size of 5.2 µm. The slow kinetics of recrystallization was also revealed by JMAK model as the Avrami exponent was calculated around one for all of the experiments. These observations are rationalized in part by the possible formation of microalloying elements carbides during the annealing process in association with the existence of the inhomogeneously deformed initial microstructure. This results in the appearance of a continuous regime for the recrystallization nucleation along with the sluggish movement of recrystallization fronts.
 
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
چکیده انگلیسی مقاله One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored in an API X120 grade, advanced, High-Strength, Low-Alloy (HSLA) steel with an initial cold-deformed martensite microstructure. The steel sheet was the subject of a conventional cold rolling process for moderate true strain of 60% followed by isothermal recrystallization for different temperature-time combinations. Optical microscopy and scanning electron microscopy were used to characterize the microstructural evolutions, and the recrystallization kinetics was evaluated by hardness measurements with the aid of the Johnson-Mehl-Avrami-Kolmogorov (JMAK) relationship. The experimental results indicated that annealing at 948 K (675 °C) for 18 h is the optimum condition to achieve a grain-refined ferrite microstructure with an averaged grain size of 5.2 µm. The slow kinetics of recrystallization was also revealed by JMAK model as the Avrami exponent was calculated around one for all of the experiments. These observations are rationalized in part by the possible formation of microalloying elements carbides during the annealing process in association with the existence of the inhomogeneously deformed initial microstructure. This results in the appearance of a continuous regime for the recrystallization nucleation along with the sluggish movement of recrystallization fronts.
کلیدواژه‌های انگلیسی مقاله Advanced HSLA steels,Thermomechanical processing,Martensite recrystallization kinetics,Grain refinement
نویسندگان مقاله M. Nili-Ahmadabadi |
Advanced Phase Transformations Laboratory (APTL), School of Metallurgy and Materials Engineering, University of Tehran, Tehran 14395-515, Iran

A. S. Ghorabaei |
Advanced Phase Transformations Laboratory (APTL), School of Metallurgy and Materials Engineering, University of Tehran, Tehran 14395-515, Iran

نشانی اینترنتی
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات