این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Dentistry, Shiraz University of Medical Sciences، جلد ۸، شماره ۳، صفحات ۳۳-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Different Placement Techniques and Curing Methods on Composite Microhardness in Class I Restorations
چکیده انگلیسی مقاله Statement of problem: The polymerization of light cured composite resins is initiated from surface layer and the rate of polymerization reduces from surface to depth. The difference in hardness is in correlation with different factors such as the intensity of unit and the distance between composite and light tip. Purpose: The aim of this study was to compare the effect of four different methods of filling and two light direction on microhardness of class I composite resin restorations. Materials and method: In this parallel interventional study, 40 intact human premolar teeth were selected. Class I cavities were prepared (4×4×4 mm). After etching and applying Excite as a dentin adhesive, the specimens were divided into four groups (n=10) based on the filling methods: Group 1)one bulk, group 2)horizontal incremental and occlusal light curing, group 3)horizontal incremental and three directional light curing, Group 4)oblique and three directional light curing. Z100 was used for restoration of cavities. Microhardness of specimens was measured by kicker's microhardness tester in 0, 1.5, 2.5 and 3.5 mm distance from surface. Data were analyzed using ANOVA and Duncan tests (_=0.05). Results: The mean value of microhardness in groups 1 and 2 showed significant difference from that of groups 3 and 4 (p< 0.05). Within each group, the subsurface layer showed the highest value of hardness (P< 0.05) except for group 2 that all surfaces showed a similar hardness value (p>0.05). Conclusion: Based on the results of this study, incremental technique (oblique or horizontal) with three dimensional light curing is the most suitable procedure for obtaining a maximum hardness in Class I composite resin restoration.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله n سرابی | n sarabi
assistant professor, department of operative dentistry, member of dental research center, school of dentistry, mashhad university of medical sciences

سازمان اصلی تایید شده: دانشگاه علوم پزشکی مشهد (Mashhad university of medical sciences)

h عامری | h ameri
assistant professor, department of operative dentistry, member of dental research center, school of dentistry, mashhad university of medical sciences

سازمان اصلی تایید شده: دانشگاه علوم پزشکی مشهد (Mashhad university of medical sciences)

mj مقدس | mj moghadas
assistant professor, department of operative dentistry, member of dental research center, school of dentistry, mashhad university of medical sciences

سازمان اصلی تایید شده: دانشگاه علوم پزشکی مشهد (Mashhad university of medical sciences)

نشانی اینترنتی http://dentjods.sums.ac.ir/index.php/JDSUMS/article/view/373
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده Original Article
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات