این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 26 مهر 1404
Iranian Journal of Materials Science and Engineering
، جلد ۱۲، شماره ۱، صفحات ۱-۱۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
INTRAPLY HYBRID COMPOSITES BASED ON BASALT AND NYLON WOVEN FABRICS: TENSILE AND COMPRESSIVE PROPERTIES
چکیده انگلیسی مقاله
In this study, the tensile and compressive behaviors of pure and hybrid composite laminates reinforced by basalt–nylon bi-woven intra-ply fabrics were experimentally investigated. Epoxy resin was used as the matrix material. The purpose of using this hybrid composite is to obtain superior characteristics by using the good strength property of basalt fiber with the excellent toughness of nylon fiber. Five different types of woven fabric were used as reinforcement with different volume percentages of nylon (0%, 25%, 33.3%, 50% and 100%). The effects of nylon/basalt fiber content on tensile and compressive parameters were studied. In addition, the after failure visual inspection and scanning electron microscopy (SEM) analysis was used to determine the extent and type of damage on tested specimens. The results indicate that the tensile and compressive performances of these composites are strongly affected by the nylon/basalt fiber content. Also, with a proper choice of fiber content, the nylon/basalt hybrid composites can achieve mechanical properties comparable with the pure ones. The stress–strain curves, after failure visual inspection and SEM analysis of tested specimens reveal that hybridization can prevent catastrophic and complete failure. In hybrid composites, the basalt and nylon fibers cannot reach their maximum strength at the same time and the progressive failure of the various fibers therefore occurred
کلیدواژههای انگلیسی مقاله
Intra-ply, Hybrid, Tensile, Compressive, Basalt, Nylo
نویسندگان مقاله
h نصرتی | h. nosraty
department of textile engineering, amirkabir university of technology, tehran, iran.
سازمان اصلی تایید شده
: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)
m تهرانی دهکردی | m tehrani dehkordi
department of carpet, shahrekord university, shahrekord, iran.
محمد مهدی شکریه | m m shokrieh
school of mechanical engineering, iran university of science and technology, tehran, iran.
سازمان اصلی تایید شده
: دانشگاه علم و صنعت ایران (Iran university of science and technology)
g minak | g. minak
alma mater studiorum - università di bologna, diem, viale risorgimento 2, 40136 bologna, italy.
نشانی اینترنتی
http://ijmse.iust.ac.ir/browse.php?a_code=A-10-127-70&slc_lang=en&sid=en
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
گروه سرامیک
نوع مقاله منتشر شده
Research paper
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات