این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Science and Engineering، جلد ۱۲، شماره ۴، صفحات ۶۲-۷۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی EFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
چکیده انگلیسی مقاله  Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this purpose two series of experiments were designed. In the first set of experiments, the alloy was melted and cooled in three different rates, i.e. 0.04, 0.42, and 1.08 K/s in a DTA furnace. In the second series of experiments, the effect of grain refinement on the microsegregation at a constant cooling rate of 0.19 K/s was investigated. Al-5Ti-1B master alloy was used as grain refiner. Results showed that by increasing the cooling rate the amount of non-equilibrium eutectic phase increases from 5.1 to 7.4 wt.%, and the minimum concentration of solute element in primary phase decreases from 1.51 to 1.05 wt.% Cu. By grain refinement of the alloy, the amount of non-equilibrium eutectic phase decreases from 5.5 to 4.7 wt.%, and the minimum concentration of solute element in the primary phase increases from 0.98 to 1.07 wt.% Cu. So it is concluded that increasing cooling rate in the range of 0.04 to 1.08 K/s, increases and grain refinement reduces the microsegregation 
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله m دهنوی | m. dehnavi
1- department of materials engineering and metallurgy, ferdowsi university of mashhad, mashhad, iran

سازمان اصلی تایید شده: دانشگاه فردوسی (Ferdowsi university)

m حداد سبزوار | m haddad sabzevar
1- department of materials engineering and metallurgy, ferdowsi university of mashhad, mashhad, iran

سازمان اصلی تایید شده: دانشگاه فردوسی (Ferdowsi university)

محمدحسین avazkonandeh gharavol | m h avazkonandeh gharavol
1- department of materials engineering and metallurgy, ferdowsi university of mashhad, mashhad, iran

سازمان اصلی تایید شده: دانشگاه فردوسی (Ferdowsi university)

h وفایی نژاد | h. vafaeenezhad
school of metallurgy and materials engineering, iran university of science and technology, tehran, iran

سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

نشانی اینترنتی http://ijmse.iust.ac.ir/browse.php?a_code=A-10-988-1&slc_lang=en&sid=en
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده گروه مکانیکی و شکل دادن
نوع مقاله منتشر شده Research paper
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات