این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Iron and Steel Society of Iran، جلد ۲، شماره ۱، صفحات ۲۱-۲۵
عنوان فارسی Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Limit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron
چکیده انگلیسی مقاله It is well-known that severe deformation to metals causes a direct grain refinement of the matrix without special heat-treatments due to the mechanism of dynamic continuous recrystallization (DCR). However, the microstructural revolution during severe deformation is seemed to be different depending on the deformation mode, namely the direction of deformation. In general, multi-directional deformation is thought to be effective for the grain refinement caused through DCR. For instance, ultra-grain-refinement to 10nm has already achieved by mechanical milling treatment in a steel powder and hardness of mechanically milled steel powder is increased to around HV12GPa by such a marked grain refinement. On the other hand, hardness of iron never exceeds HV4GPa by the mode of uni-directional deformation such a conventional cold rolling. In this paper, a limit of dislocation density is discussed for iron which is severely strained by the mode of uni-directional deformation, and also the importance of multi-directional deformation on DCR will be mentioned in association with a significant work hardening behavior in mechanically milled iron powder
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله setsuo takaki |
dept. of materials science and engineering, kyushu university, 6-10-1 hakozaki, higashi-ku, fukuoka 812-8581, japan,

نشانی اینترنتی http://journal.issiran.com/article_4781_8e338de669e8f44d09d6dc7c67de265c.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات