این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 10 مهر 1404
International Journal of Iron and Steel Society of Iran
، جلد ۳، شماره ۱، صفحات ۱-۷
عنوان فارسی
The Strain Dependence of Post-Deformation Softening during the Hot Deformation of ۳۰۴H Stainless Steel
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
The Strain Dependence of Post-Deformation Softening during the Hot Deformation of 304H Stainless Steel
چکیده انگلیسی مقاله
Experiments were carried out in which the dependence of the fractional softening on temperature, time and strain rate was determined in a 304H stainless steel. Three prestrain ranges were identified pertaining to three different post-deformation softening behaviors: 1) prestraining to below the DRX critical strain: strongly strain dependent softening by SRX alone with softening kinetics controlled by growth rate of the nuclei; 2) prestraining to above the DRX critical strain: SRX + MDRX softening with weaker strain dependence of the kinetics but still controlled by grain growth; 3) at a prestrain of e* and beyond: nucleation-controlled MDRX softening with the full inhibition of SRX. The transition prestrain e* can exceed the peak strain if the DRX grain refinement ratio
g
=
D
0
/
D
DRX
> 4. The transition to MDRX-dominated softening can be attributed to a constant value of the normalized strain hardening rate independent of the preloading temperature and strain rate. The softening data from the compression tests show that at e*, the time for half softening
t
50
exhibits a minimum. These data differ somewhat from observations obtained in the torsion testing of solid bars, in which no strain dependence of
t
50
was detected at e* and beyond. Whether or not the strain dependence of
t
50
vanishes in the MDRX range is sensitive to the test method employed to study the post-deformation softening.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
a نجفی زاده |
department of materials engineering, isfahan university of technology, isfahan, iran
سازمان اصلی تایید شده
: دانشگاه صنعتی اصفهان (Isfahan university of technology)
j j jonas | j j
department of metallurgical engineering mcgill university, montréal, canada
نشانی اینترنتی
http://journal.issiran.com/article_4805_e5f2956c08d0c9accb3bb1c240e1e263.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات