International Journal of Nano Dimension، جلد ۷، شماره ۱، صفحات ۵۷-۷۰

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Numerical study of turbulent forced convection jet flow of nanofluid in a converging sinusoidal channel
چکیده انگلیسی مقاله Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer by increasing the total heat transfer from a surface and changing the behavior of the flow. In this paper two-dimensional incompressible nanofluid flow in a confined sinusoidal converging jet in turbulent flow regime is numerically investigated. Results have been shown for the flow structure at different Reynolds numbers for steady asymmetric jet development at various values of the duct-to-jet width ratio (aspect ratio), different amplitudes of surface undulation and different volume fractions of nanoparticles. For considering unsteady treatment of the flow, the streamlines and temperature contours result for the unsteady problem is presented and compared with the steady results. The present computations are in a very good agreement with experimental results in open literature. The results show that by increasing the Reynolds number, aspect ratio, amplitude and volume fraction the average the Nusselt number will increase.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله a طاهری | a. taheri
school of mechanical engineering, mazandaran university of science and technology, babol, iran.
سازمان اصلی تایید شده: دانشگاه علوم و فنون مازندران (Mazandaran university of science and technology)

e aboukazem پور امیری | e aboukazem pour amiri
department of mechanical engineering, iran university of science and technology, narmak, tehran, iran.
سازمان اصلی تایید شده: دانشگاه علوم و فنون مازندران (Mazandaran university of science and technology)

a رامیار | a. ramiar
school of mechanical engineering, babol university of technology, p. o. box 484, babol, iran.
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

علی اکبر رنجبر | a a ranjbar
school of mechanical engineering, babol university of technology, p. o. box 484, babol, iran.

m رحیمی esbo | m rahimi esbo
school of mechanical engineering, babol university of technology, p. o. box 484, babol, iran.


نشانی اینترنتی http://www.ijnd.ir/article_15585_eda9bd6bfcebb4aca7f9dfe7c59d356a.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات