گلجام، جلد ۵، شماره ۱۳، صفحات ۱۰۷-۱۲۲

عنوان فارسی بررسی تا‌خوردگی فرش دست‌باف تحت فشار استاتیکی
چکیده فارسی مقاله  جهت بررسی تا‌خوردگی فرش دست‌باف تحت فشار استاتیکی، نمونه فرشی آزمایشی در سه حالت مختلف تا‌خورده تحت باری معادل با 50 g/cm2 قرار گرفته و سپس به‌صورت متوالی و یکنواخت بار اعمالی به ترتیب تا 100، 200، 500، 1000 و 1500 g/cm2 افزایش می‌یابد و ضخامت آنها به‌صورت متوالی ثبت و سپس با حذف متوالی و یکنواخت بارها به ترتیب و مجدداً ضخامت نمونه فرش آزمایشی قرائت می‌گردد. با شبیه‌سازی و برازش مدل دو جزئی فشار‌پذیری de-jong بر روی نتایج حاصله، ضمن تخمین ضخامت جزء غیرقابل فشار، پارامترهای فشار‌پذیری فرش در سیستم KES-F محاسبه و مورد قضاوت قرار می‌گیرند. براساس نتایج به‌دست آمده مشخص گردید انرژی فشرده‌سازی در انحنای تا‌خورده فرش بسیار پایین بوده، درحالی‌که انرژی فشرده‌سازی در منطقه‌ای که دو لایه فرش روی یکدیگر قرار می‌گیرند بسیار بالا است. با این حال درصد جهندگی در منطقه‌ای که دو لایه فرش روی یکدیگر قرار دارند، بر خلاف منطقه انحنای تا‌خورده به میزان قابل توجهی پایین بوده که این مسئله حاکی از حساسیت و شکل‌پذیری راحت‌تر این منطقه در مقایسه با منطقه‌ای است که دو لایه فرش روی یکدیگر قرار می‌گیرند. از سویی دیگر ضخامت جزء غیرقابل فشار در منطقه‌ای که دو لایه فرش روی یکدیگر قرار می‌گیرند از سایر مناطق بررسی شده بیشتر است. در این حالت فشرده‌سازی تنها به‌واسطه فرورفتن پرز‌های لایه فوقانی در لایه تحتانی رخ می‌دهد. در حالت تخت و بدون تا‌خوردگی نیز بوم قالی فشرده نشده و صرفاً پرز‌ها تا حد امکان بر روی هم فشرده می‌شوند. در این مقاله برای توصیف رفتار تا‌خوردگی فرش دست‌باف تحت فشار استاتیکی از پدیده Domino تاخوردگی بهره گرفته می‌شود.
کلیدواژه‌های فارسی مقاله فرش دست باف، تا خوردگی، فشار پذیری

عنوان انگلیسی Study of Folding of Handmade Carpet under Static Pressure
چکیده انگلیسی مقاله To study the way of folding handmade carpets, the selected sample has been put under pressure of 50g/cm2 weight at three different states. The pressure has increased uniformly and continuously at 100,200, 500, 1000 and 1500 g/cm2. The thickness of the carpet has been recorded continuously during the measurement of the thickness of the carpet sample. The pressing parameters of the carpet have been calculated in KES-F system with simulation and fitting of two components model of de-jong pressure. Also, the thickness of the part that is not able to be pressed is estimated. Based on the obtained results, it has been shown that pressing energy in the curved folded part of the carpet is very low, but the pressing energy in the part with two layers of the carpet on each other is very high. Nevertheless, the percentage of elasticity in two layers of the carpet placed on each other is remarkably low. It shows that the sensitivity and flexibility of this area is more in comparison with two layers of the carpet. On the other hand, the thickness of the part that is not able to be pressed in the area with two layers of the carpet on each other is more than that of the investigated areas. In this way, the pressing is carried out by piercing the upper naps on the lower ones. Without folding and flatting of the carpet, it is not pressed and just upper layer naps are pressed on the lower layers. In this study, the phenomenon of Domino folding is used to describe the folding behavior of the handmade carpet under static pressing
کلیدواژه‌های انگلیسی مقاله Hand-woven Carpet, Folding, Pressing

نویسندگان مقاله سید علی مجابی | seyyed ali mojabi
school of arts, architecture and urban planning, islamic azad university, najaf abad branch
دانشکده هنر، معماری و شهر سازی، دانشگاه آزاد اسلامی واحد نجف آباد
سازمان اصلی تایید شده: دانشگاه آزاد اسلامی نجف آباد (Islamic azad university of najafabad)

سعید شیخ زاده نجار | saeed sheikzadeh najjar
school of textile engineering, amirkabir university
دانشکده مهندسی نساجی، دانشگاه صنعتی امیرکبیر
سازمان اصلی تایید شده: دانشگاه صنعتی امیرکبیر (Amirkabir university of technology)

شاهرخ حسینی هاشمی | shahrokh hosseini hashemi
school of mechanical engineering, science amp; technology university
دانشکده مهندسی مکانیک، دانشگاه علم و صنعت
سازمان اصلی تایید شده: دانشگاه علم و صنعت ایران (Iran university of science and technology)

سیدجلال الدین بصام | seyyed jalal o din bassam
institute of technical and vocational higher education, agriculture jihad, agricultural research, education and extension organization
موسسه آموزش عالی علمی کاربردی جهاد کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی
سازمان اصلی تایید شده: سازمان تحقیقات


نشانی اینترنتی http://goljaam.icsa.ir/browse.php?a_code=A-10-61-5&slc_lang=fa&sid=fa
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/1535/article-1535-573854.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده بافت و مرمت
نوع مقاله منتشر شده علمی - پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات