این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied and Computational Mechanics، جلد ۱۱، شماره ۲، صفحات ۵۴۱-۵۵۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Analysis of the Design of Cavities with Isothermal Blocks under Mixed Convection
چکیده انگلیسی مقاله Using the constructal design method (CDM), this study aimed to evaluate how the convective heat transfer in a lid‑driven cavity, with an isothermal block (IB) inside, is affected by the cavity aspect ratio (AR). In addition to the impact of AR on the convection process, the effects of the size block – represented by Φ – and its dimensionless horizontal position (x0*) inside the cavity were also explored. Sixty-two designs were evaluated under different Richardson numbers (Ri) representing forced, mixed, and natural convection mechanisms, resulting in 186 cases. The convective flow inside the cavity was considered Newtonian, two-dimensional, laminar, incompressible, and steady‑state. The mathematical model consisted of the conservation equations of mass, momentum (in x and y directions), and energy. The differential equations that comprise the mathematical model were solved computationally through numerical simulations using the finite volume method. Based on the results obtained, it was observed that to increase the convective heat transfer inside the cavity, the most recommended option is to use lower AR values corresponding to a horizontally elongated cavity shape. Among all the different designs tested for the system, the one that proved to be the most suitable for promoting the convective heat transfer, measured by the dimensionless heat transfer rate (q*) on the IB walls, was defined by AR = 0.35 and Φ = ¼. It was through this design, with the IB horizontally positioned in its center (x0* = 0.5), that the highest value of q* (31.08) was obtained in the dominant forced convection scenario (Ri = 0.1).
کلیدواژه‌های انگلیسی مقاله Constructal Design,Lid-Driven Cavity Flow,Cavity Aspect Ratio,Mixed convection,Isothermal Block
نویسندگان مقاله Rafael Da Silveira Borahel |
Computational Modeling Graduate Program, Universidade Federal do Rio Grande, Rio Grande, 96203-900, RS, Brazil

Flávia Schwarz Franceschini Zinani |
Institute of Hydraulic Research, Universidade Federal do Rio Grande do Sul, Porto Alegre, 91501-970, RS, Brazil

Liércio André Isoldi |
Computational Modeling Graduate Program, Universidade Federal do Rio Grande, Rio Grande, 96203-900, RS, Brazil

Elizaldo Domingues Dos Santos |
Computational Modeling Graduate Program, Universidade Federal do Rio Grande, Rio Grande, 96203-900, RS, Brazil

Luiz Alberto Oliveira Rocha |
Computational Modeling Graduate Program, Universidade Federal do Rio Grande, Rio Grande, 96203-900, RS, Brazil

نشانی اینترنتی https://jacm.scu.ac.ir/article_19416_9f93ef2487638051f8430835415d30f0.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات