این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 13 آذر 1404
فیض
، جلد ۲۱، شماره ۵، صفحات ۴۶۰-۴۶۹
عنوان فارسی
بررسی برهمکنش لیزر اگزایمر ۳۰۸ نانومتری زنون کلراید با بافت های سخت مینا و عاج دندان
چکیده فارسی مقاله
سابقه و هدف: خروجی پالسی لیزر اگزایمر XeCl (308 نانومتری) و عملکرد نورکندگی آن نسبت به عملکرد گرمایی، قابلیت این نوع لیزر را برای برداشت ساختارهای بافت سخت، با حداقل تولید حرارت در بافت آشکار می سازد. مواد و روش ها: تعداد 20 نمونه دندان عقل و آسیاب کاملا سالم از انسان (10 دندان بهعنوان نمونه های مینا و 10 دندان دیگر پس از حذف بافت مینا از روی تاج، به عنوان نمونه های عاج) با لیزر مورد پرتودهی قرار گرفتند. تاج هر دندان به صورت یک مکعب در نظر گرفته شد و وجوه جانبی آن در فرکانس ثابت 2 هرتز و بدون حضور آب پرتودهی شدند. تعداد 18 حفره، هم برای نمونه های عاج و هم برای نمونههای مینا به دست آمد. سه مقدار متفاوت انرژی به عنوان فاکتور متغیر با 6 گام پالسی متفاوت در هریک از انرژی های مذکور انتخاب گردیدند. تصاویر حفره های مذکور با ترکیب اپتیک و کامپیوتر تهیه شده و با پردازش آنها در نرمافزار Matlab، مقادیر عمق کندگی و سطح مؤثر کندگی محاسبه شدند. نتایج: افزایش عمق کندگی با افزایش تعداد پالس در هر دو بافت مشاهده شد. عمق کندگی با ازدیاد انرژی برای هر دو بافت افزایش یافت و مقادیر منسوب به عمق کندگی و سطح مؤثر کندگی در بافت عاج نسبت به بافت مینا بیشتر شد. مرز کندگی برای حفره های ایجاد شده توسط این لیزر تیز و شفاف مشاهده شد. نتیجه گیری: کاربرد لیزر XeCl برای حذف بافت سخت و آماده سازی حفره پس از اعمال برخی تغییرات و اصلاحات خاص در این نوع لیزر امکان پذیر خواهد بود.
کلیدواژههای فارسی مقاله
لیزر XeCl، عمق کندگی، عاج، مینا، آماده سازی حفره
عنوان انگلیسی
Evaluating the interaction of 308-nm xenon chloride excimer laser with human dentin and enamel hard tissues
چکیده انگلیسی مقاله
Background: The pulsed output of the 308 nm XeCl laser and its photoablation action rather than photothermal action offers the ability to remove dental hard tissues with minimal generation of heat in the tissue. Materials and Methods: A total of 20 human molar teeth (ten teeth used as enamel samples and ten teeth used as dentin samples after removing the enamel tissue from their crowns) were irradiated by the laser. The crown of each sample was regarded as a cube which its lateral sides were exposed in 2Hz frequency without water cooling. Also, 18 holes for all enamel samples and 18 holes for all dentin samples were obtained. Three different amounts of energy were selected as a variable factor with 6 different numbers of pulses in each energy. The images of these holes were prepared by optic and computer combining, and the amounts of the ablation depth and effective ablation area were calculated using the MATLAB software. Results: The amounts of ablation depth were increased with increasing the number of pulses for both enamel and dentin tissues. The amounts of ablation depth were also increased with increasing the amounts of energy for both enamel and dentin tissues. The greater amounts of ablation depth and effective ablation area were observed in the dentin tissue rather than the enamel tissue. The borders of created holes were reported sharp and clear. Conclusion: The application of the XeCl laser for hard tissue removal and cavity preparation can be possible after some certain modifications.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
مهشید یغماییان مهابادی | mahshid yaghmaeian mahabadi
student in atomic and molecular physics in the field of laser, tehran kharazmi university, tehran, i. r. iran.
پژوهشگر و مؤلف، دانشگاه خوارزمی تهران، ایران
سازمان اصلی تایید شده
: دانشگاه خوارزمی (Kharazami university)
عباس مجدآبادی | abbas majdabadi
laser and optics research school, nuclear science and technology research institute, tehran, i. r. iran.
عضو هیئت علمی و محقق در پژوهشگاه علوم و فنون هسته ای، ایران
رضا فکر آزاد | reza fekrazad
department of periodontics, school of dentistry, tehran university of medical sciences, tehran, i. r. iran.
گروه آموزشی پریودنتیکس، دانشکده دندانپزشکی، دانشگاه علوم پزشکی و خدمات بهداشتی درمانی آجا، تهران، ایران.
سازمان اصلی تایید شده
: دانشگاه علوم پزشکی ارتش (Artesh university of medical sciences)
جواد امینی مهابادی | javad amini mahabadi
gametogenesis research center, kashan university of medical sciences, kashan, iran.
مرکز تحقیقات گامتوژنزیس، دانشگاه علوم پزشکی کاشان، کاشان، ایران
سازمان اصلی تایید شده
: دانشگاه علوم پزشکی کاشان (Kashan university of medical sciences)
حسین نیک زاد | hossein nikzad
gametogenesis research center, kashan university of medical sciences, kashan, i. r. iran.
مرکز تحقیقات گامتوژنزیس، دانشگاه علوم پزشکی کاشان، کاشان، ایران
سازمان اصلی تایید شده
: دانشگاه علوم پزشکی کاشان (Kashan university of medical sciences)
نشانی اینترنتی
http://feyz.kaums.ac.ir/browse.php?a_code=A-10-444-2&slc_lang=fa&sid=fa
فایل مقاله
دریافت فایل مقاله
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
medicine, paraclinic
نوع مقاله منتشر شده
پژوهشی
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات